Bolton LS2's with Fast 102mm Intake Manifold & Ported TB, Dyno Numbers thread !!
#1
Bolton LS2's with Fast 102mm Intake Manifold & Ported TB, Dyno Numbers thread !!
Hey,
Heard that the stock Intake manifold of C6's LS2's are crappy, and the Combo of Fast 102mm IM & Ported TB will give the car 15-20whp
So, I made this thread to see real dyno results before and after the installation of Fast Manifold and TB on Bolton C6 LS2, Let's see what the LS2 dyno with FULL BOLTONS.
Heard that the stock Intake manifold of C6's LS2's are crappy, and the Combo of Fast 102mm IM & Ported TB will give the car 15-20whp
So, I made this thread to see real dyno results before and after the installation of Fast Manifold and TB on Bolton C6 LS2, Let's see what the LS2 dyno with FULL BOLTONS.
#2
Melting Slicks
You can pick up 15-20 with a properly ported LS2 intake & TB and for a fraction of the price of a FAST 102.
RKT56 just did a back to back dyno test this weekend, here is a link.
http://forums.corvetteforum.com/c6-p...b-service.html
RKT56 just did a back to back dyno test this weekend, here is a link.
http://forums.corvetteforum.com/c6-p...b-service.html
#4
Joe doesn't have a Fast 102, but this still might help.
http://forums.corvetteforum.com/c6-t...ast-heads.html
http://forums.corvetteforum.com/c6-t...ast-heads.html
#6
Racer
Member Since: Jul 2007
Location: Florence Kentucky
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
#7
Pro
Went from 427/422 at wheels to 465/438 at wheels. Only change was from VMAX ported intake manifold to FAST 102 and retune to get VE and PE tables set due to lean condition with FAST 102.
Other mods in place before swap to FAST are in my profile (mild cam, ported TB, Vararam, Patriot Stage 3 heads, LG tubes, Corsa exhaust).. and LOTS of time with HPTuners log data!
Other mods in place before swap to FAST are in my profile (mild cam, ported TB, Vararam, Patriot Stage 3 heads, LG tubes, Corsa exhaust).. and LOTS of time with HPTuners log data!
#10
Race Director
Member Since: Mar 2007
Location: Missouri City Texas
Posts: 11,331
Likes: 0
Received 14 Likes
on
14 Posts
My bolton A6 LS2 made 397 SAE corrected (includes underdrive pulley but no electric water pump or ported TB)
Around 400 is what a full bolton LS2 will make. M6s a bit higher.
Around 400 is what a full bolton LS2 will make. M6s a bit higher.
Last edited by FloydSummerOf68; 12-04-2012 at 08:45 AM.
#15
Safety Car
here is a link to my freinds write up from when he his fast installed with dyno sheets.
28rwhp gain
http://forums.corvetteforum.com/c6-t...st-intake.html
and then 510 race engineering retuned it after LMR and gained 11 more rwhp just retuning.
http://forums.corvetteforum.com/c6-t...dyno-tune.html
28rwhp gain
http://forums.corvetteforum.com/c6-t...st-intake.html
and then 510 race engineering retuned it after LMR and gained 11 more rwhp just retuning.
http://forums.corvetteforum.com/c6-t...dyno-tune.html
Last edited by smurfkiller; 12-18-2013 at 06:53 PM.
#16
SUBVETTE