EvanZR1

Just installed a blower so I don't need these anymore. Have a Z06 air intake with the ZR1/LS9 filter in it and a CorvetteMods cold air shroud for Z06/GS (isolates air intake from engine air).

Asking $100 for the entire set.

EvanZR1

ttt

Wakemaker89

Evan, does this make much difference over the stock intake for a GS?

EvanZR1

Honestly the intake will make zero difference performance wise, but it does clean up the engine bay a little. The air filter flows better, but it depends on what year you have. 2012-2013 come with the LS9 filter. The shroud isolates the air intake tract from the engine bay and should help keep IATs down, but I don't have any logging to show actual difference.

dustbusterplus

I have a base coupe and was wondering how much the intake shroud hangs over on the sides. Here's what I'm thinking, if you look at the cuts made to the radiator baffle in the middle picture of post #6, if I make those cuts it will allow the cool air to come into the area enclosed by the shroud. This of course being necessary due to the lack of the opening present on the GS and 427 cars.

http://forums.corvetteforum.com/c6-c...t-shields.html

EvanZR1

It's no wider than the stock air cleaner assembly, you'd probably have to make a cut or prop the piece open in the middle.

dustbusterplus

PM Sent yesterday

EvanZR1

Replied