LMR C7 makes highest HP in the world! 1121 rwhp!!
LMR C7 Corvette just made 1121 rwhp!!! Most HP to date in the world for a C7. Video to follow!! Stay tuned for more!:cheers:
http://i245.photobucket.com/albums/g...psf7313809.jpg |
Looks like a shot of nitrous on top of what ever else you have going on in this car?? Either way, that is some insane power! Congrats!
|
This is starting the beg the question of 'how in the hell are these stock bottom-ends holding down 250-300% rated power'?
Very nice. :thumbs: |
Didn't say it was a stock bottom end.
|
This is true, but I believe the last 1000-hp dyno they ran was, indeed, on the stock bottom end.
|
Originally Posted by Theta
(Post 1586398459)
This is starting the beg the question of 'how in the hell are these stock bottom-ends holding down 250-300% rated power'?
Very nice. :thumbs: |
Originally Posted by Late Model Racecraft
(Post 1586398313)
LMR C7 Corvette just made 1121 rwhp!!! Most HP to date in the world for a C7. Video to follow!! Stay tuned for more!:cheers:
http://i245.photobucket.com/albums/g...psf7313809.jpg :rock: |
Nicely done guys.....insane power :rock::rock::rock:
|
This is absolutely insane!!!
|
Knowed it wouldn't be long.
|
This is awesome! Hope Vengeance enjoyed their 15 minutes of fame! LOL Nice work guys. This proves everything is always BETTER in Texas!
|
yowsa! details on the build and most importantly the benjamins needed to make it happen!!
great job, that's a lot of oooffff dah |
Congrats guys!! We knew you were coming :)
Ill be back in a bit... Need to go change some jets :D :D :D |
Think we need more info on this car... Im curious. Im assuming this is not a stock short block but if it is thats really bad ass....
|
Great work LMR! How much N2O did you use?
|
Originally Posted by breecher_7
(Post 1586401696)
Think we need more info on this car... Im curious. Im assuming this is not a stock short block but if it is thats really bad ass....
|
Awesome work congrats LMR and Vengeace for pushing these C7s to the limits.
its 150shot from the video I saw not sure if its stock bottom or not. |
You guys were so close to making 1000rwhp on boost only, was it just not there or what?
|
Originally Posted by Ron@Vengeance Racing
(Post 1586401898)
This is the same car the engine was out a few weeks ago... Looking like built shortblock/heads & cam/YSI/Nitrous (roughly 125 shot?)... I could be wrong, just thinking out loud. :thumbs:
|
Originally Posted by vettesmakethemwet
(Post 1586403397)
Sounds like someone is fishing...
:cheers: |
Originally Posted by Theta
(Post 1586398459)
This is starting the beg the question of 'how in the hell are these stock bottom-ends holding down 250-300% rated power'?
Very nice. :thumbs: lived for 24k miles then a rod finally went (stock motor had 109k on the clock when it happened) I think stock engines are built much stronger than anyone will let on. With a proper tune i see no reason why these LT1s couldnt live at 800hp all day long |
Originally Posted by vettesmakethemwet
(Post 1586403397)
Sounds like someone is fishing...
Sorry, left my rod & reel at the house.....Just going by what LMR posted a few weeks back. You seem to have an agenda given your comments in this thread, but LMR/Vengeance and several other top shops in the country all work together. We are extremely excited to see the guys raise the bar yet again. :cheers: |
Originally Posted by TurboJunky
(Post 1586404103)
way back in the day i pushed a 150whp VW VR6 stock short block to 460whp
lived for 24k miles then a rod finally went (stock motor had 109k on the clock when it happened) I think stock engines are built much stronger than anyone will let on. With a proper tune i see no reason why these LT1s couldnt live at 800hp all day long In a time when most companies are cutting back to save on production costs, it's impressive to see an engine like this emerge in such a stout form! |
Originally Posted by Theta
(Post 1586404222)
It's nice to see that this is becoming the norm, rather than the exception.
In a time when most companies are cutting back to save on production costs, it's impressive to see an engine like this emerge in such a stout form! I still wish they would put forged slugs and rods in these things though, at the production level the cost difference would be next to nothing. Pretty sure all of us would be fine with a $50 price increase for forged hard parts! |
Originally Posted by Ron@Vengeance Racing
(Post 1586404218)
Sorry, left my rod & reel at the house.....Just going by what LMR posted a few weeks back.
You seem to have an agenda given your comments in this thread, but LMR/Vengeance and several other top shops in the country all work together. We are extremely excited to see the guys raise the bar yet again. :cheers: |
Nice job guys! :cheers:
|
Originally Posted by Late Model Racecraft
(Post 1586404403)
Our setup is a built bottom end, YSI blower and a small shot of N20. We continue to work with Vengeance and other shops to improve the performance and reliability of these fantastic cars. At the end of the day we want to put the best product out there that we can for the corvette enthusiast.
Thought i wanted a C6 Z06 or even a C7 or Camaro or well its an ever changing list But reading up on mods and the power they are making - hard to look away. Keep up the good work |
LMR Is this car at the TX2K Event?
|
Congratulations guys!!! :salute:
|
Originally Posted by Ron@Vengeance Racing
(Post 1586404218)
...but LMR/Vengeance and several other top shops in the country all work together. We are extremely excited to see the guys raise the bar yet again. :cheers:
Originally Posted by Late Model Racecraft
(Post 1586404403)
We continue to work with Vengeance and other shops to improve the performance and reliability of these fantastic cars. At the end of the day we want to put the best product out there that we can for the corvette enthusiast.
This is how it should be, too bad this industry is so damn cut throat. Working together helps not only the masses, but, each other as well. |
Originally Posted by SNL/MonsterClutchCo
(Post 1586405705)
This is how it should be, too bad this industry is so damn cut throat. Working together helps not only the masses, but, each other as well.
|
Its crazy seeing this much power this soon, gotta give credit where its due to the shops really pushing things to innovate :).
|
The First Drive
Originally Posted by Late Model Racecraft
(Post 1586398313)
LMR C7 Corvette just made 1121 rwhp!!! Most HP to date in the world for a C7. Video to follow!! Stay tuned for more!:cheers:
http://i245.photobucket.com/albums/g...psf7313809.jpg Thanks LMR, :rock::rock::rock: You all are the best! |
Originally Posted by CFHay
(Post 1586403176)
You guys were so close to making 1000rwhp on boost only, was it just not there or what?
The Texas TX2K14 Event is in town this weekend so I didn't have much time to tune the car after engine was installed, just one afternoon. After this event, and when we get caught back up at the shop I will put her back on dyno for more tuning. She WILL make over 1000RWHP on boost only and then add an even bigger shot to find our limits. We need to know what fails first but we have a pretty good idea what will(from past experience from LS engines) exactly what is going to happen. More to come.... Steven Fereday |
Originally Posted by Late Model Racecraft
(Post 1586413003)
Thank you for all the nice words guys. We really have been working really hard to do a lot of R&D on this new platform so we will be able to provide our customers with a reliable combination that they can enjoy.
The Texas TX2K14 Event is in town this weekend so I didn't have much time to tune the car after engine was installed, just one afternoon. After this event, and when we get caught back up at the shop I will put her back on dyno for more tuning. She WILL make over 1000RWHP on boost only and then add an even bigger shot to find our limits. We need to know what fails first but we have a pretty good idea what will(from past experience from LS engines) exactly what is going to happen. More to come.... Steven Fereday Are you planning to put the car on the TX2K14 1/4 mile ? |
Originally Posted by Mr.Chevy
(Post 1586413123)
Are you planning to put the car on the TX2K14 1/4 mile ?
Steven Fereday |
All times are GMT -4. The time now is 07:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands