Originally Posted by Arun@Dasilvamotorsports (Post 1582660930)

Going to do a new build for 2013 at DasilvaMotorsports. Basically to get the most out of the least-but by no means are we cheaping out-but were going to put the money where we feel is going to give the best return.

And with all that we have learned over the years-we have a pretty good understanding what we need and what we don't need.

Here's what we have collected:

http://i127.photobucket.com/albums/p...2-26133532.jpg

A brand new LS2 aluminum block, some Wiseco pistons with the older 1.5/1.5/3mm ring pack ( thanks to Rob@Champion for a killer deal on these parts!), a set a LSA heads which will get sent out for some CNC porting.

Were just waiting on a set of K1 billet H-beams and a 4340 stock stroke crank.

This is going to be a 365 cube motor topped with a YSi-goal is too make 1000 rwhp plus and run 8.6-8.8's at 160+mph. We also have plans to run this combo at a 1/2 mile event in Chicago this June, our goal is to run 185-190 mph in the half mile.

After this combo is thoroughly tested and put through it's paces-it will get yanked, refreshed and sold to a lucky customer-a tried/tested and proven combo!

Originally Posted by Blitzkrieg (Post 1582808802)

I very much look forward to this build!

I'm looking forward to going side by side at the 1/2 mile June 1st

Originally Posted by 69ls6 (Post 1582808948)

Hope your new engine is together an installed by then.:cool:

Originally Posted by Blitzkrieg (Post 1582809348)

Oh I'll be ready to go my man!!!:thumbs:

Originally Posted by Arun@Dasilvamotorsports (Post 1582809474)

I thought you said that the $195 entrance fee was too much?

Originally Posted by Blitzkrieg (Post 1582809554)

I'm going to starve my kids for 6 months and that should be enough to clear the cost!

Originally Posted by ajrothm (Post 1583622688)

Arun, you gonna continue to run the 4l60e or upgrade to the 80e?

Originally Posted by Arun@Dasilvamotorsports (Post 1583622931)

My car doesn't make big power-so 60 is all I need.

:cheers: