drivinfast

I was able to get a great deal on these Penskes 8200 LE dual rate spring and height adjustable from HardbarUSA. These are totally upgradeable coil overs. I am a jewelry aficionado, so these look like jewelry to me. Oh well they are going to get dirty on the track...sometimes the pics are from different sides TOTAL pic set http://www.flickr.com/photos/drivinf...7615264313618/

front before with the aftermarket bilsteins it has the brake duct kit on as well as the transversal leaf spring

bilsteins removed and everything disconnected

fitting penskes up

leaf springs leaving. pdfat orange anodized motor mount

leaf spring gone


need to get final installed pics later

a few rear w leaf gone


pdfat tranny mounts anodized orange

DSOM Z06

Looks great! What's the difference between these and the new Pfadt's?

0Taylor@DallasPerformance

Very nice Mark. Penske has always had a nice dampener!

Wicked Weasel

I have dual rate coil overs with penske triples from hardbar. Best suspension setup I have had on my car.

drivinfast

Seems like the faster I went the tighter the coilovers held for me at the top end....the stock leafs let me drift above 160 or so previously

LINK for the MILE I just posted

http://forums.corvetteforum.com/c6-t...post1569519685

drivinfast

The Penskes have clevis' both front and back. do the PFadts?

ghoffman

The small black clevis mounts on the upper part of the shocks are all 4 corners, but the big red clevis is for the lower rear only. These are all Hardbar specific parts.

VRedZ06

I have The hardbar Penske 8670 complete set up it's the best set up ever.. 2006 Z06