My TI exhaust bit the dust
#1
Drifting
Thread Starter
My TI exhaust bit the dust
So I had noticed what sounded like a heat shield rattle ... could not pin point it then took it to my tuner who found the rattle in the exhaust muffler part of the TI ... Choice to let it rattle was simple for me but he suggested to put it on the dyno compare the pull to the last ... We were down 14 HP from last time .... Un bolt it and a net increase of 16 hp over last time ... so thought is that something is busted loose in there blocking the flow out... Anyone else ever had this?
#2
Drifting
There isn't really anything in there that could come loose and block airflow.
http://forums.corvetteforum.com/c5-g...6-muffler.html
You'll see all there is is some pipes and the steel wool, which doesn't look like it's going anywhere...
http://forums.corvetteforum.com/c5-g...6-muffler.html
You'll see all there is is some pipes and the steel wool, which doesn't look like it's going anywhere...
#3
Drifting
Thread Starter
There isn't really anything in there that could come loose and block airflow.
http://forums.corvetteforum.com/c5-g...6-muffler.html
You'll see all there is is some pipes and the steel wool, which doesn't look like it's going anywhere...
http://forums.corvetteforum.com/c5-g...6-muffler.html
You'll see all there is is some pipes and the steel wool, which doesn't look like it's going anywhere...
#4
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 343,252
Received 19,370 Likes
on
14,018 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Thanks for posting the link which details the inside of a Ti muffler.
#5
Drifting
So I had noticed what sounded like a heat shield rattle ... could not pin point it then took it to my tuner who found the rattle in the exhaust muffler part of the TI ... Choice to let it rattle was simple for me but he suggested to put it on the dyno compare the pull to the last ... We were down 14 HP from last time .... Un bolt it and a net increase of 16 hp over last time ... so thought is that something is busted loose in there blocking the flow out... Anyone else ever had this?
#6
Tech Contributor
Member Since: Dec 2003
Location: Horncastle Lincolnshire, England
Posts: 19,384
Likes: 0
Received 79 Likes
on
61 Posts
2023 C5 of the Year Finalist - Unmodified
Not on the Vette but the cat on my son's Flowmaster broke down causing a blockage. It was a write off unfortunately. I took forever to work that one out