fit and finish on carpet and floor mats
09-27-2004, 11:07 AM
#1
Melting Slicks
Thread Starter
Member Since: May 2004
Location: All of the true things that I am about to tell you are shameless lies. --Bokonon
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '04-'05-'07
fit and finish on carpet and floor mats
This is my first disappointement in my C6, and the first thing I can say my C5 was superior in. The quality of the weave seems cheap and the fit in places is poor. Aftermarket Lloyds floor and cargo mats will be an improvement.
09-27-2004, 11:13 AM
#2
Burning Brakes
Member Since: Jun 2004
Location: Conshohocken (Suburb of Philadelphia) PA
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Pep Boys heavy duty black rubber mats for the front work great (after being cut down to fit in properly)
Chevy/GM are once again "dropping the ball" with not producing quality, manufacturers slush/rubber mats for the 'Vette.
Same thing for a manufacturers full rubber, heavy duty cargo area bed liner.
For this, I'll be also be cutting down a larger piece of black rubber liner from Pep Boys to line the area and keep the carpet clean.
Chevy/GM are once again "dropping the ball" with not producing quality, manufacturers slush/rubber mats for the 'Vette.
Same thing for a manufacturers full rubber, heavy duty cargo area bed liner.
For this, I'll be also be cutting down a larger piece of black rubber liner from Pep Boys to line the area and keep the carpet clean.
02-24-2005, 07:04 PM
#4
Melting Slicks
Originally Posted by Mark S.
Always remember...it's still a Chevy (and when you take her in for service...you will be reminded of that).
Really? When I take my vette in for service at the local Chevrolet dealership, I also drive it in onto the lift! The car never leaves the dealership unless I'm in it. Of course, it took me years to do this...
