New brake pad change on Z06
05-06-2024, 06:29 PM
#81
SUPPORT AUTISM
REALLY?
Once you remove the bolt, you will know that it was not torqued to the extreme, maybe you cannot tell the difference. If you need a torque wrench to tighten a bolt to 22 lbs, you should have someone else perform this task. Thanks for the tip!
Once you remove the bolt, you will know that it was not torqued to the extreme, maybe you cannot tell the difference. If you need a torque wrench to tighten a bolt to 22 lbs, you should have someone else perform this task. Thanks for the tip!
05-06-2024, 09:23 PM
#82
Built multiple race cars… you don’t mess with brakes when going 160+ on track. Do it right or don’t do it at all. As tight as possible is way more than 22 lbs.
05-06-2024, 11:02 PM
#83
Le Mans Master
Member Since: Apr 2005
Location: West Burbs of Chicago IL
Posts: 6,801
Received 4,079 Likes
on
1,726 Posts
The following users liked this post:
RapidC84B (05-07-2024)
The following 3 users liked this post by RacerRik:
05-07-2024, 10:53 AM
#85
Race Director
Member Since: Aug 2019
Location: Central Illinois
Posts: 10,168
Received 11,768 Likes
on
4,692 Posts
I bought this in 2020 for my C8 stingray , it does fit my 2023 Z06, i only use it for the rear.
https://zl1addons.com/products/magas...xoC3jwQAvD_BwE
https://zl1addons.com/products/magas...xoC3jwQAvD_BwE