Holley Serpentine Kit Fit for C3 BB?
#1
Team Owner
Thread Starter
Member Since: Jul 2004
Location: Redondo Beach, California
Posts: 39,585
Received 557 Likes
on
379 Posts
Holley Serpentine Kit Fit for C3 BB?
Has anyone installed the Holley Serpentine Kit for a Big Block in their C3? Is there an interference with the hood or the radiator? I assume to install this kit, you'd have to for sure remove the stock radiator shroud. No problem there. https://www.holley.com/products/engi...RoCkvMQAvD_BwE
Thanks.
Thanks.
#2
Le Mans Master
Based on how far forward that crank pulley is, I would expect crossmember interference.
Now, I can guarantee that the March Performance system works and you don't need a specific one-off water pump. I have been running this system for over 10 years. They used to offer it without AC using a standard rotation water pump. (And it is $400 cheaper than the Holley).
https://marchperformance.com/big-blo...rt-water-pump/
Older phot without additional idler pulley.
Now, I can guarantee that the March Performance system works and you don't need a specific one-off water pump. I have been running this system for over 10 years. They used to offer it without AC using a standard rotation water pump. (And it is $400 cheaper than the Holley).
https://marchperformance.com/big-blo...rt-water-pump/
Older phot without additional idler pulley.
#3
Team Owner
Thread Starter
Member Since: Jul 2004
Location: Redondo Beach, California
Posts: 39,585
Received 557 Likes
on
379 Posts
Based on how far forward that crank pulley is, I would expect crossmember interference.
Now, I can guarantee that the March Performance system works and you don't need a specific one-off water pump. I have been running this system for over 10 years. They used to offer it without AC using a standard rotation water pump. (And it is $400 cheaper than the Holley).
https://marchperformance.com/big-blo...rt-water-pump/
Older phot without additional idler pulley.
Now, I can guarantee that the March Performance system works and you don't need a specific one-off water pump. I have been running this system for over 10 years. They used to offer it without AC using a standard rotation water pump. (And it is $400 cheaper than the Holley).
https://marchperformance.com/big-blo...rt-water-pump/
Older phot without additional idler pulley.
Looks like you have 3X2 carbs (?) and I see fuel rails running above the intake manifold/cylinder head interface. With fuel rails, I would expect that you have sequential port fuel injection. Maybe a nitrous setup? Can you say what this configuration is? Thanks again.
#4
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,791
Received 6,581 Likes
on
4,071 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
this March one is what Ive been looking at. I like the black version and its half the cost of the other if you reuse your pump https://marchperformance.com/big-blo...rt-water-pump/
960 at March but 760 at summit https://www.summitracing.com/parts/mch-20585-08
960 at March but 760 at summit https://www.summitracing.com/parts/mch-20585-08
The following users liked this post:
68/70Vette (05-20-2024)