You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
I put approximately 10k miles on this kit in the 2 years I had it. It made 751rwhp on my stock shortblock with stock heads. The only part missing here is 1 silicone coupler for the blower inlet available for $12-$30 such as this one http://www.amazon.com/Vibrant-2716-B.../dp/B001806VAO. I removed this kit myself, and I made sure to get every single piece. Parts included:
A&A kit with ram air intercooler and all sheet metal to box it in.
T-trim v3 upgrade (self contained)
4 oz oil for blower
All fasteners, etc from kit
KB BAP with racetronix hotwire kit
8-rib tensioner, blower, and idler pulleys on bracket
Upgraded Tial 50mm BOV
Crank pinning fixture seen in pics. Needs the 1/4" pin available at any hardware store for $0.50.
The 8-rib pullies on the bracket will work fine with your 6 rib accessories, and will save you money if you upgrade later. The other 8-rib parts are for sale separately.
You will need upgraded injectors.
You can see the fitting on the drain line is scuffed up. It is cosmetic, but you could use a new plug easily if you like.
I'm asking $3,500. Shipping and/or payal fees are at the buyer's expense. 70lbs and likely 2 boxes.
Corvette Store
C5 A&A T-trim V3 8-Rib Blower Kit
