Edelbrock Facilities Tours are by Appointment Only and I have been able to work with the Great people at Edelbrock in Torrance to allow us to Visit their Facilities.
I will not be setting up a Cruise for afterward. But if someone or Club from the area would like to organize a cruise for afterward feel free to post on this tread.
I am organizing a gathering on:
Date Saturday August 28th Admission is FREE
Time 9:30 am (They open at 10:00)
Location Edelbrock
510 Madrid St
Torrance, CA.
Tour Information
*Tours of the Edelbrock Facilities are by Appointment Only*
The group will assemble at 510 Madrid St., Torrance CA 90501. This is the sight of VicÂ’s Garage. Staff will open the doors at approx. 9:45 am allowing access to the museum and restrooms. Your tour will begin at 10:00 am sharp. You will start in the museum with a speech outlining the history of Edelbrock, given by either Vic or Camee Edelbrock. After which our tour guides and volunteers will split the audience up into smaller groups for a walking tour of our Manufacturing, Shock, Exhaust facilities and Distribution Center. There will be a lot of walking involved in the tour, so please ensure that your group members are dressed accordingly. Your groups will be carpooling between the facilities on sight at VicÂ’s Garage and our Manufacturing and Corporate Divisions located two blocks away at 2700 California St. Once all the groups have completed the tour it is back to VicÂ’s Garage for lunch. The store in VicÂ’s Garage will be open and stocked with Edelbrock apparel (pricing located in the back of our automotive catalog). We would also like to point out that photos may only be taken in VicÂ’s Garage. There will be no photography allowed in any of the other buildings.
Directions to VicÂ’s Garage
510 Madrid St., Torrance CA 90501
Coming from the 405 freeway:
Exit south on Crenshaw. Go approx. 1 mile south to 208th St. and turn left at the signal. Go up to Madrid St. and Edelbrock is on the corner of 208th and Madrid on your right hand side. Please use the parking lot in front of the building on Madrid St.
Coming from the 91 freeway:
Take the 91 west until it ends (turning into Artesia Blvd). Continue west on Artesia until you come to Crenshaw Blvd and turn left. Go approx 1 mile south to 208th St. and turn left at the signal. Go up to Madrid St. and Edelbrock is on the corner of 208th and Madrid on you right hand side. Please use the parking lot in front of the building on Madrid St.
OK here are the 47 people that I have signed up for the Tour. If you are on the list and will not be able to make it PLEASE contact me so I can add someone from the waiting list.
Name People
Chucks87 2
Capaletti 2
Alcee1 1
Vert-I-go 2
B R 1
joemoia 1
MusTgoFaster-92 1
RJ98Vette 2
jstkrsn 2
Joe Huerta 3
qs_zo6 2
fixvet 2
wallstAL 1
devo 1
MikeNMaxZO6 1
bogus 2
Mill Club 15
Roy Juan 1
Phil Del Pozo 1
bobmoore2 1
Bryan 1
MagRedRuss 1
SteveS66 1
RedRiderZR1 1
C54MREW 1
MyVetteDream 1
CircusVargas 2
doughboy 1
adamsocb 1
Unfortunately I need to cancel. Sorry for the late notice. I forgot that that is the same day that my daughter is starting collage……Kids….so inconsiderate.
The Edelbrock tour was fantastic! Thanks, Chuck, for setting this up. Their hospitality and willingness to spend so much time with us was very impressive.
The Edelbrock tour was fantastic! Thanks, Chuck, for setting this up. Their hospitality and willingness to spend so much time with us was very impressive.
The Edelbrock tour was fantastic! Thanks, Chuck, for setting this up. Their hospitality and willingness to spend so much time with us was very impressive.
Thanks Chuck. The best part was finding out they are going to make a cost-effective LS1/6 cylider head!
Well, I guess I third it. Chuck you always take the time to make sure we all have a great time at each event. Thanks again. Also I would like to thank DaveQ for letting me ride with him, since my tranny messed up, you're a cool guy Dave. I had a great time and I'm looking foward to the next....
__________________
SS Inserts, Shift Knob, Diamond Cut Rev Lights, Glass Top, Full Screen Kit, Short Shifter, Tinted Windows, Interior LED's, Lowered, Caravaggio Rear Spoiler, Gauge Bezels, White Face Gauges, Red/Clear Euro Lenses, Borla Exhaust, Homelink, Clear Side Markers, Two Tone Seat Covers, CF & Silver Engine Covers, Clear Corners, Drilled/Slotted Rotors, Twin Flow Air Intake, CAGS, C6 Wheels, HID's, Chrome Hoops, CF Interior, Chrome Brake Brackets, PIAA's, etc.
Location: Los Angeles, CA.... I know a guy who has a Lambo with Corvette doors
I just wanted to say that I had a good time, it was very cool, informative, fun, etc. Thanks Chuck, it was good to finally meet you. Keep up the good work .
Corvette Store
Attendants list for Edelbrock Tour 8/28
I need to be help with a room remodel and work on my company's election campaign in Glendale.
