what compression ratio would this be?
07-17-2004, 08:22 PM
#1
Instructor
Thread Starter
Member Since: Jun 2004
Location: NE
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
what compression ratio would this be?
With a 1969 427 bb standard bore what compression ratio will I be at with these 305 afr heads while using closed chamber standard size TRW L2268F pistons? The pistons have a .300 dome and the afr heads have a 119cc combustion chamber.
07-18-2004, 09:29 AM
#4
Instructor
Member Since: Aug 2000
Location: Houston Texas
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Engraver
Love my AFR 195 SBC heads, considering the 305s for my '76 454 Suburban.
Jeff
07-18-2004, 10:51 AM
#5
Instructor
Thread Starter
Member Since: Jun 2004
Location: NE
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jeff's Classics
Last time I called AFR about those heads they weren't available yet. You might want to call and see if they have made production yet.
Love my AFR 195 SBC heads, considering the 305s for my '76 454 Suburban.
Jeff
Love my AFR 195 SBC heads, considering the 305s for my '76 454 Suburban.
Jeff
They must be available now. I ordered a set direct from AFR about a month ago. They said 4 to 6 weeks for delivery. Ordered them assembled along with a few other parts... total damage $2239.00 plus $55 shipping... Ouch!!
07-18-2004, 11:08 AM
#6
Race Director
Originally Posted by Engraver
9.94 : 1 is good! How did you figure it out?
They don't call me MotorHead for nothing......actually I just looked them up pretty slow night.
http://www.flatlanderracing.com/trwchevy396_427.html