Broke My Petcock, Dayum!
#1
Drifting
Thread Starter
Broke My Petcock, Dayum!
Changing my anti-freeze this morning on my '78 SA I accidently twisted off the petcock while tightening it back up. Can it be fixed in some way or is it time for a new radiator?
#2
Drifting
Re: Broke My Petcock, Dayum! (1SGRET)
I think they screw out. I remember replacing one that the "T" broke on a long time ago.
Go to Corvette Central 's site here
http://www.parts123.com/PartFrame.as...rvette_Central
And search "Radiator drain fowl" for your year
[Modified by 72GACRZR, 7:12 PM 7/6/2004]
the forum censor changed the last word it is Kcock without the K
[Modified by 72GACRZR, 7:14 PM 7/6/2004]
Go to Corvette Central 's site here
http://www.parts123.com/PartFrame.as...rvette_Central
And search "Radiator drain fowl" for your year
[Modified by 72GACRZR, 7:12 PM 7/6/2004]
the forum censor changed the last word it is Kcock without the K
[Modified by 72GACRZR, 7:14 PM 7/6/2004]
#3
Drifting
Thread Starter
Re: Broke My Petcock, Dayum! (72GACRZR)
Actually, the petcock and the mounting threads came off at the base of the radiator. Just pulled right out.
#4
Drifting
Re: Broke My Petcock, Dayum! (1SGRET)
In that case, I would start by calling a good radiator shop in your area and ask them this question. You might be able to pull it and have them clean it up and repair it cheaper than buying a new one, especially if originallity is important to you.