Drivers floor courtesy light
07-05-2004, 05:50 PM
#1
"Rodstoration &am p;quot; In Progres
Thread Starter
Member Since: Jun 2004
Location: Frisco TX
Posts: 1,397
Likes: 0
Received 0 Likes
on
0 Posts
Drivers floor courtesy light
Could someone take a look at how the courtesy light is mounted at the drivers kick panel... I either lost a bracket or can not figure this out.
Thanks!
Ed
Thanks!
Ed
07-05-2004, 05:52 PM
#2
Race Director
Re: Drivers floor courtesy light (80TexasC3)
There is supposed to be a small bracke that attaches at the very top hole in the kick panel with one screw. Hope this helps.
07-05-2004, 06:02 PM
#4
"Rodstoration &am p;quot; In Progres
Thread Starter
Member Since: Jun 2004
Location: Frisco TX
Posts: 1,397
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drivers floor courtesy light (Eddie 70)
Thanks... I'll search around the garage... If this is the only thing I lost... then I'm pretty happy.
07-05-2004, 06:05 PM
#5
Race Director
Re: Drivers floor courtesy light (80TexasC3)
Funny, I am missing my passengers side light mount and can't find it. Hmmm......... 
07-06-2004, 12:18 AM
#8
"Rodstoration &am p;quot; In Progres
Thread Starter
Member Since: Jun 2004
Location: Frisco TX
Posts: 1,397
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drivers floor courtesy light (81' Corvette Guy)
Joe...
yep... Take a look at my "refurb" thread... have "a few" items to revisit. With this one, I just figured that I will pick up some larger dia screws tomorrow.
Ed
yep... Take a look at my "refurb" thread... have "a few" items to revisit. With this one, I just figured that I will pick up some larger dia screws tomorrow.
Ed
07-06-2004, 07:12 PM
#9
"Rodstoration &am p;quot; In Progres
Thread Starter
Member Since: Jun 2004
Location: Frisco TX
Posts: 1,397
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drivers floor courtesy light (80TexasC3)
Just finished the fix by switching to 1/4 x 1 1/2 screws... All is well now.