Muffler inlet/outlet - both offset?
#1
Instructor
Thread Starter
Member Since: Mar 2002
Location: Elko New Market MN
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Muffler inlet/outlet - both offset?
going with Flowmaster 40's for 75 350 auto with Dynomax headers. Are the inlet/oulet both offset? I believe the ones I remember seeing were and I want to keep the stock look. Search did not reveal answer.
Thanks
Bob
Thanks
Bob
#3
Le Mans Master
Re: Muffler inlet/outlet - both offset? (Bobbyg75)
My 74 and most of the pipes I've seen in the supplier catalogs are offset on both ends. Here's a pic of my stock mufflers:
Here's a pic of my Ultraflows which I got as a kit from Mid America. Notice that the inlet and outlet positions are reversed because the kit supplied inlet pipes are shorter than the stock ones. This necessitated moving the rear muffler hanger mount outward.
Here's a pic of my Ultraflows which I got as a kit from Mid America. Notice that the inlet and outlet positions are reversed because the kit supplied inlet pipes are shorter than the stock ones. This necessitated moving the rear muffler hanger mount outward.
#5
Tech Contributor
Re: Muffler inlet/outlet - both offset? (migraine99)
40's on my son's 75.
Gary
Gary
#6
Pro
Member Since: Aug 2002
Location: South Central MI
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Re: Muffler inlet/outlet - both offset? (gtr1999)
Gary, why are they canted like that? I remember seeing them before and I was inquisitive then, so I thought why not ask
#7
Tech Contributor
Re: Muffler inlet/outlet - both offset? (Freepop)
So they don't hang down from the sides,the older cars were angled too. This picture was taken from 3" under the car.
#8
Pro
Member Since: Aug 2002
Location: South Central MI
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Re: Muffler inlet/outlet - both offset? (gtr1999)
I have a 74 and have mine like vetfxrs. A guy in town had his done at the local garage and they stood them on end But after seeing their work, I wouln't take a skate board to them