M/C for Hydraboost?
#1
Drifting
Thread Starter
M/C for Hydraboost?
I just installed my Hydraboost and new VB&P front callipers. One of the callipers and the M/C blew out. VB&P sent me the new O rings. What can be done about the M/C? Is there an upgrade from stock? What are my options if any? TIA
Rick
Rick
#2
Race Director
Member Since: Jun 2001
Location: The Only Corvette in Gila Bend, Az.
Posts: 16,483
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '09
Re: M/C for Hydraboost? (Taijutsu)
You can either buy a rebuild kit for yours, or you can buy a replacement one.
Try "Rockauto" for some good prices...
http://www.rockauto.com/
Try "Rockauto" for some good prices...
http://www.rockauto.com/