Looking for spark plug recommendations
#1
Race Director
Thread Starter
Looking for spark plug recommendations
I am going to put the new motor in this weekend and one thing I haven't figured out yet is what spark plugs to use. The Vic Jr. heads put one of my plugs directly in line with a header tube so I will have to ding the tube but I still need a shorter plug.
Edelbrock tech recommends a Champion PN # C63YC but has no recommendation for a shortyplug. The plug he recommended was 14mm with 3/4in. reach and projected nose. Anyone know how to cross reference this plug to an Accel shorty or similar ?
Seems like there is as much info on this subject as there should be.
Any ideas on how I can finger this out are appreciated. :D
[Modified by MotorHead, 10:21 AM 5/28/2004]
Edelbrock tech recommends a Champion PN # C63YC but has no recommendation for a shortyplug. The plug he recommended was 14mm with 3/4in. reach and projected nose. Anyone know how to cross reference this plug to an Accel shorty or similar ?
Seems like there is as much info on this subject as there should be.
Any ideas on how I can finger this out are appreciated. :D
[Modified by MotorHead, 10:21 AM 5/28/2004]
#2
Race Director
Member Since: Sep 2002
Location: San Diego - Deep Within The State of CONFUSION!
Posts: 10,362
Likes: 0
Received 2 Likes
on
2 Posts
Re: Looking for spark plug recommendations (MotorHead)
I use Accel Shortys. Never in a million years would I use a Champ plug in anything but a lawn mower or a scooter. :beatdeadhorse:
#3
Race Director
Thread Starter
Re: Looking for spark plug recommendations (SanDiegoPaul)
These are the Champion race plugs about $3.50 US ea.
What part number for the Accel plugs and do you have aluminium heads ?
What part number for the Accel plugs and do you have aluminium heads ?