I bet there's no-one here that ....
#1
Le Mans Master
Thread Starter
I bet there's no-one here that ....
... took their exhaust out and scrubbed it end-to-end with scotch bright and degreaser.
Not bad looking for a 10-year old exhaust.
:seeya
pic not showing ? ? right mouse button - show picture (my server is slow)
[Modified by NHvette, 2:09 PM 5/20/2004]
[Modified by NHvette, 12:10 PM 5/21/2004]
Not bad looking for a 10-year old exhaust.
:seeya
pic not showing ? ? right mouse button - show picture (my server is slow)
[Modified by NHvette, 2:09 PM 5/20/2004]
[Modified by NHvette, 12:10 PM 5/21/2004]
#4
Race Director
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes
on
9 Posts
Re: I bet there's no-one here that .... (NHvette)
My exhaust is 3 inch 304 stainless and I often take emery paper and polish it. I put the car on the ramps and do a thorough polishing.
#9
Le Mans Master
Re: I bet there's no-one here that .... (Tex71BB)
Some of you guys have too much time on your hands.... polishing your exhaust pipes.... :rolleyes: If you have too much free time, I've got some work that you can do on my car (and in my back yard... and in my basement... and in the front yard....)
#12
Re: I bet there's no-one here that .... (NHvette)
If you have enough time on your hands to polish exhaust pipes, then you need to get another Vette project car to work on.
#16
Le Mans Master
Thread Starter
Re: I bet there's no-one here that .... (Summerfun)
Norval ... no fair, you don't count.
Polish the insides .... I'll have to buy some new tools for that.
The grill you see has not been used in 3 years ... keep it as backup (but can't get gas tank for old style filled).
Actually, I didn't polish it up ... cleaned it very well so it can be painted.
I think I might use the can of POR-20 that I have for this.
:seeya
Polish the insides .... I'll have to buy some new tools for that.
The grill you see has not been used in 3 years ... keep it as backup (but can't get gas tank for old style filled).
Actually, I didn't polish it up ... cleaned it very well so it can be painted.
I think I might use the can of POR-20 that I have for this.
:seeya