Main bearing measurement Please!!
05-18-2004, 07:38 PM
#1
Burning Brakes
Thread Starter
Main bearing measurement Please!!
Hello everyone!!! I need the standerd measuremnt of the main bearing of a 1967 , 327cid. It should be in the ware-abouts of 2inchs, but not sure???
Thanks in advance!!!!!!!!!!!!!!!!!! :seeya
Thanks in advance!!!!!!!!!!!!!!!!!! :seeya
05-18-2004, 08:20 PM
#2
Race Director
Re: Main bearing measurement Please!! (Michel B)
Mains 2.2983" to 2.2993" and rods 1.9990" to 2.0000" hope yo have a accurate mic need to measure to 1 / 10,000 " :D
[Modified by MotorHead, 8:42 PM 5/18/2004]
[Modified by MotorHead, 8:42 PM 5/18/2004]
05-18-2004, 09:25 PM
#3
Burning Brakes
Thread Starter
Re: Main bearing measurement Please!! (MotorHead)
Thanks!!!! I didn't realize this motor had two differant cranks dipending on year of manufacture, until I started to measure with the specs of 1968, only about a half inch differance :smash: Tomorow I will bring a good mic from work and I will be able to dicide on wich size bearing to order. :steering: