Complete exhaust suggestions.
05-06-2004, 12:35 PM
#1
Intermediate
Thread Starter
Member Since: May 2004
Location: Monterey CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Complete exhaust suggestions.
Stock 350 on my 77 but first I want to put on a new exhaust and new headers. Looking for ideas (and part numbers) from the headers down to the muffler. Also where I can get them. I'm so lost :crazy: looking through website after website and not knowing whats good or what will fit etc.
05-06-2004, 01:23 PM
#2
Re: Complete exhaust suggestions. (JMNBRZ)
Hooker Competition Headers 2456HKR
http://www.holley.com/HiOctn/ProdLin...HHCH/Comp.html
Get your headers ceramic coated. Yo ucan buy them coated from the factory or even better have them done by a place like Jet Hot, which is popular on this forum. I had mine coated by a local guy.
Remove the old exhaust and manifolds youself. Install the headers yourself as well, neither are terrible jobs. The rest of the exhaust I had done at a shop. I went with 3" to 2.5" reducers and 2.5" stainless steel dual exhaust all the way back. I had two high flow cats put on. At the end I put on Magnaflow stainless steel mufflers. http://www.magnaflow.com/02product/xl/xlperformance.htm
A nice touch you may want is stainless steel brackets/hangers, and of course shiny exhaust tips. Some guys like an 'H' pipe connecting the two sides too. If you do a search you'll find lots of discussion on this for sure.
:cheers:
http://www.holley.com/HiOctn/ProdLin...HHCH/Comp.html
Get your headers ceramic coated. Yo ucan buy them coated from the factory or even better have them done by a place like Jet Hot, which is popular on this forum. I had mine coated by a local guy.
Remove the old exhaust and manifolds youself. Install the headers yourself as well, neither are terrible jobs. The rest of the exhaust I had done at a shop. I went with 3" to 2.5" reducers and 2.5" stainless steel dual exhaust all the way back. I had two high flow cats put on. At the end I put on Magnaflow stainless steel mufflers. http://www.magnaflow.com/02product/xl/xlperformance.htm
A nice touch you may want is stainless steel brackets/hangers, and of course shiny exhaust tips. Some guys like an 'H' pipe connecting the two sides too. If you do a search you'll find lots of discussion on this for sure.
:cheers: