C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

some body questions

Thread Tools
 
Search this Thread
 
Old 05-02-2004, 05:54 PM
  #1  
stingraymaniac
Le Mans Master
Thread Starter
 
stingraymaniac's Avatar
 
Member Since: Jun 2003
Location: Umeå Sweden
Posts: 5,133
Received 68 Likes on 49 Posts

Default some body questions

my car is alittle lower on one side.
its just at the backend off the body on the drivers side
its equal at the back tires but not back there
what could be wrong ore is it just that way with this car?
have checked the body mounts and they seem fine
saw it this afternoon when i was working with my sidepipe installation..
Old 05-03-2004, 05:21 PM
  #2  
72GACRZR
Drifting
 
72GACRZR's Avatar
 
Member Since: Aug 2002
Location: Marietta Ga.
Posts: 1,731
Likes: 0
Received 22 Likes on 14 Posts

Default Re: some body questions (stingraymaniac)

Just a few late guesses:
1. Are the spring bolts even, or is one tighter than the other?

2. Was it level or could the gas have been to that side of the tank?

3. How about shims on the back most body mounts?

Oh well just some ramblins to get the experts thinking after this sends it back TTT.
Old 05-03-2004, 05:27 PM
  #3  
stingraymaniac
Le Mans Master
Thread Starter
 
stingraymaniac's Avatar
 
Member Since: Jun 2003
Location: Umeå Sweden
Posts: 5,133
Received 68 Likes on 49 Posts

Default Re: some body questions (72GACRZR)

well i shall check the mounts.
measure if they are level.
hopefully its only too shim it up alittle on one side?

Get notified of new replies

To some body questions




Quick Reply: some body questions



All times are GMT -4. The time now is 12:51 PM.