Cylinders - need some input...
#1
Burning Brakes
Thread Starter
Member Since: Nov 2003
Location: North Texas
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Cylinders - need some input...
Ok, I got the head with the leak off tonight.
My question is: How much cylinder wear is acceptable? Most of the cylinders are smooth to the touch. However, I have one that I can feel some roughness. Dry Cylinder pressure was fine - 185 psi.
My question is: How much cylinder wear is acceptable? Most of the cylinders are smooth to the touch. However, I have one that I can feel some roughness. Dry Cylinder pressure was fine - 185 psi.
#2
Burning Brakes
Thread Starter
Member Since: Nov 2003
Location: North Texas
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cylinders - need some input... (1970-Bronze)
I looked at the cylinders more today and there is some very minor verticle scaring but there are some spots in the cylinders (blotches) in the #5 cylinder that I can feel with my finger nail that just don't give me a good feeling. :nonod:
Thougts?
Thougts?