Engine Rebuild Poll - top end choices.
#1
Race Director
Thread Starter
Engine Rebuild Poll - top end choices.
I have three different ideas for my engine rebuild. Originally, I was just going to have my original heads and intake ported and rebuilt, as I wanted the car to look pretty stock under the hood. Then, I saw that the World Products Torquer heads are pretty affordable, and painted orange, wouldn't look out of place on a "stock" motor. Finally, I saw Fauxrs post the other day with his new engine, and I like the all aluminum Edelbrock top end. What do you guys think?
#3
Drifting
Re: Engine Rebuild Poll - top end choices. (adam)
As a general rule, you can go one full point of compression ratio higher with aluminum heads on the same octane. Best of both worlds if you aren't on a really tight budget.