What RPM should I shift at and does anyone want to join me at LACR tonight?
#1
Drifting
Thread Starter
Member Since: Mar 2001
Location: Valencia (near LA) CA
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
What RPM should I shift at and does anyone want to join me at LACR tonight?
This afternoon I am going to LAncaster to have my car dyno tuned, and then heading over to LACR to go drag racing :) This will be the first time there with the new engine. My last time was 14.6 or something, I hope to do MUCH better this time:) I had 236 rwhp, now I have 404rwhp and a TKO 5 speed.
My question is at what rpm should I shift?
thanks,
~Jay
My question is at what rpm should I shift?
thanks,
~Jay
#2
Team Owner
Re: What RPM should I shift at and does anyone want to join me at LACR tonight? (Jay M)
you will need to use the HP & Torque data to get a idea, then you will probably
find out you will need to adjust for your available traction at the track :thumbs:
find out you will need to adjust for your available traction at the track :thumbs:
#3
Melting Slicks
Member Since: Nov 2001
Location: Katy (Houston) TX
Posts: 2,659
Likes: 0
Received 7 Likes
on
5 Posts
CI 7-8 Veteran
Re: What RPM should I shift at and does anyone want to join me at LACR tonight? (Jay M)
If you've got your dyno sheet handy, then just plug them in here:
http://www.prestage.com/Tech+Info/Drag+Racing/1121.aspx
http://www.prestage.com/Tech+Info/Drag+Racing/1121.aspx
#4
Race Director
Re: What RPM should I shift at and does anyone want to join me at LACR tonight? (comp)
Have a blast Jay. I would come out and watch but my dang car is in paint shop prison. :jester
Good luck, have fun and make sure you tell us about your results.
Good luck, have fun and make sure you tell us about your results.
#5
Team Owner
Re: What RPM should I shift at and does anyone want to join me at LACR tonight? (Eddie 70)
First time down I would keep it real conservative and shift at 5000 - 5200... just develop a baseline. I find it hard with the helmet on because I can't hear the engine very well. Sometimes I can't even tell the tires are spinning :eek: MJ
#7
Drifting
Thread Starter
Member Since: Mar 2001
Location: Valencia (near LA) CA
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
Re: What RPM should I shift at and does anyone want to join me at LACR tonight? (MNJack)
Someone on the forum warned me not to get those Kuhmo tires.... I spun the tires through first AND second gear!!
At the beginning of the night I ran 13.2 @ 109 several times.
The best of 15 runs was 12.9 @ 110
60 ft= 2.072
8.511 @ 86.380 (1/8 mile?)
ET- 12.993
MPH- 110.517
As the night went on I got slower and slower. The track got real slick.
There was another guy there with a 700hp blown 427 C5-R C5 Vette. He had major traction problems. His best was 12.2 @ 126mph
There was also a 700 rwhp Impala SS that ran 15 on his first run! He didn't have a roll cage so he was being carful. He latter ran 12.1 at 120... I was racing him that time :)
The fastest car of the night was a race prepped Integra it ran 11.4 !!!
There was one of those Dodge trucks with a Viper engine, he ran 14.?
The funniest car of the night was a civic that did a 20 seond burnout, it sounded like a chain saw! lol... he ran against one of those new Infiniti car/truck/suv's AND LOST! LOL both were in the mid 14's
It was a really fun night and my car ran great! I met a guy who has a 70 Vette that runs 10.7! He will be there saturday for a special Vette day. I might try to go again.
I learned that it takes a lot more than HP to run quick! Now I need some better tires.
~Jay
At the beginning of the night I ran 13.2 @ 109 several times.
The best of 15 runs was 12.9 @ 110
60 ft= 2.072
8.511 @ 86.380 (1/8 mile?)
ET- 12.993
MPH- 110.517
As the night went on I got slower and slower. The track got real slick.
There was another guy there with a 700hp blown 427 C5-R C5 Vette. He had major traction problems. His best was 12.2 @ 126mph
There was also a 700 rwhp Impala SS that ran 15 on his first run! He didn't have a roll cage so he was being carful. He latter ran 12.1 at 120... I was racing him that time :)
The fastest car of the night was a race prepped Integra it ran 11.4 !!!
There was one of those Dodge trucks with a Viper engine, he ran 14.?
The funniest car of the night was a civic that did a 20 seond burnout, it sounded like a chain saw! lol... he ran against one of those new Infiniti car/truck/suv's AND LOST! LOL both were in the mid 14's
It was a really fun night and my car ran great! I met a guy who has a 70 Vette that runs 10.7! He will be there saturday for a special Vette day. I might try to go again.
I learned that it takes a lot more than HP to run quick! Now I need some better tires.
~Jay
#8
Race Director
Re: What RPM should I shift at and does anyone want to join me at LACR tonight? (Jay M)
That is great. A 60 foot time of 2.0x on street tires is very good. I average around a 2.1x with a best of 1.97 on a sticky track. Sticky tires would bring you in the mid 12s easy. Some tuning and tweaking and you should be low 12s.