1972 Lower Grill Molding
04-15-2004, 07:14 PM
#1
Team Owner
Thread Starter
Member Since: Dec 1999
Location: Florida
Posts: 26,485
Received 258 Likes
on
172 Posts
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor 03-'04-'05-'06-'07-'08-'09-10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
1972 Lower Grill Molding
It is the piece of chrome that extends down on the side of the parking light and across the bottom of the Left and Right Grill areas.
Been looking for a PN and found them for a 1968-1969 both at Ecklers and The Last Detail, but nothing for a 1972. Any ideas?
Been looking for a PN and found them for a 1968-1969 both at Ecklers and The Last Detail, but nothing for a 1972. Any ideas?
04-15-2004, 07:23 PM
#2
Pro
Re: 1972 Lower Grill Molding (OHSIXX)
On 70-72, this chrome is part of the grill. It is not an individual piece. Also, 70 where slighthly different than the 71-72 in the way they mount, and '72 don't hane the fiberoptic holes.
The grills are readily available from places like CC, Paragon, ...
[Modified by sray454, 6:24 PM 4/15/2004]
The grills are readily available from places like CC, Paragon, ...
[Modified by sray454, 6:24 PM 4/15/2004]
04-15-2004, 08:36 PM
#3
Team Owner
Thread Starter
Member Since: Dec 1999
Location: Florida
Posts: 26,485
Received 258 Likes
on
172 Posts
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor 03-'04-'05-'06-'07-'08-'09-10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
Re: 1972 Lower Grill Molding (sray454)
I see what you mean. Those are $300 pieces. Looks like I can just unscrew the molding from the grille housing and send the molding out for plating.
See any problems with that?
See any problems with that?
04-15-2004, 08:57 PM
#4
Le Mans Master
Re: 1972 Lower Grill Molding (OHSIXX)
The left and right parking light housings are 1 piece. Chrome boarder and painted grill. Don't know if a chrome shop can just do the boarder.
Eddie
Eddie
04-15-2004, 09:21 PM
#5
Team Owner
Thread Starter
Member Since: Dec 1999
Location: Florida
Posts: 26,485
Received 258 Likes
on
172 Posts
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor 03-'04-'05-'06-'07-'08-'09-10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
Re: 1972 Lower Grill Molding (Silvr77)
There are screws along the chrome border/molding that looks like they would release them by removing a few screws. :confused:
04-16-2004, 03:08 AM
#6
Drifting
Member Since: Jan 2002
Location: Chico Ca
Posts: 1,957
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1972 Lower Grill Molding (OHSIXX)
There are screws along the chrome border/molding that looks like they would release them by removing a few screws. :confused:
04-16-2004, 08:50 AM
#7
Team Owner
Thread Starter
Member Since: Dec 1999
Location: Florida
Posts: 26,485
Received 258 Likes
on
172 Posts
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor 03-'04-'05-'06-'07-'08-'09-10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
Re: 1972 Lower Grill Molding (Love My 72 and 77)
Thanks for all the great help. So, if I want nice shiny moldings it is gonna be expensive. :(
