Intake swap time! Which one to get?
04-09-2004, 10:15 PM
#1
Racer
Thread Starter
Member Since: Jan 2002
Location: Woodstock GA
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Intake swap time! Which one to get?
I've got a mild crate longblock running with my stock Q-Jet and L-48 intake. I've heard loads of good things about the Edlebrock Performer Intake- any other good recommendations?
cubic inches: 350 Cubic Inches
compression ratio: 9.1 to 1
block: 4-bolt, cast iron, 4.000" bore
crankshaft: Cast nodular, 3.480" stroke
head, chamber size: Cast iron
valve sizes (i/e): 1.940" / 1.500"
camshaft lift (i/e): 0.417" / 0.417" hydraulic
cam duration (i/e): 247 / 247 degrees
Thanks!
cubic inches: 350 Cubic Inches
compression ratio: 9.1 to 1
block: 4-bolt, cast iron, 4.000" bore
crankshaft: Cast nodular, 3.480" stroke
head, chamber size: Cast iron
valve sizes (i/e): 1.940" / 1.500"
camshaft lift (i/e): 0.417" / 0.417" hydraulic
cam duration (i/e): 247 / 247 degrees
Thanks!
