C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

ned help with 76 wiring

Thread Tools
 
Search this Thread
 
Old 04-02-2004, 10:38 PM
  #1  
Simba
Heel & Toe
Thread Starter
 
Simba's Avatar
 
Member Since: Apr 2004
Location: richmond va
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default ned help with 76 wiring

Well I tried to post pics to describe my problem but I need a lesson on how,but heres a link... http://members.cardomain.com/highness
alt went up in a poof of smoke.......new alt,same poof.....HULK SMASH!!!!!! I have 3 wires still stumping me and i have 3 diagrams that are only mildly helpful...confusing to say the least......in the bottom pic i dotted the 3 wires in question.......where do they go? The blue and red are the ones i hooked to my starter hot pole and the yellow i grounded by the trans.....what am i doing wrong? when my alt went the first time i found i also fried 2 connectors, ive replaced them but i dont want to fry them again....any ideas?thanx in advance for any help. oh and if i leave the plastic connector on the top of the alt unplugged,no smoke and it cranks!! plug it in poof!!! GRRRRRRR!!!

Oh and i didnt take it apart, i got it as a basketcase or id know how to put it back together!!!!
Old 04-03-2004, 05:37 PM
  #2  
goinbroke
Burning Brakes
 
goinbroke's Avatar
 
Member Since: Jun 2002
Location: Texas
Posts: 837
Likes: 0
Received 3 Likes on 3 Posts

Default Re: ned help with 76 wiring (Simba)

Here are some discussions on starter wiring from the archives.....I think these should help. http://forums.corvetteforum.com/zerothread?id=606174 http://forums.corvetteforum.com/zerothread?id=217258 http://forums.corvetteforum.com/zerothread?id=633562 http://forums.corvetteforum.com/zerothread?id=452511 http://forums.corvetteforum.com/zerothread?id=153104
Good luck with it...wiring is frustrating for me also.



Quick Reply: ned help with 76 wiring



All times are GMT -4. The time now is 11:06 PM.