Lookee what I found at a swap meet
#1
Race Director
Thread Starter
Lookee what I found at a swap meet
I usually go home empty handed from swap meets because stuff is overpriced or junk, but the first thing I saw when I walked in the door was a pair of fabricated valve covers I have been looking at for some time now.
Summit sells Moroso identical to these for an ungodly amount. I got these for less than half that, they are new but have a couple of small sratches I may or may not try and get removed.
Summit sells Moroso identical to these for an ungodly amount. I got these for less than half that, they are new but have a couple of small sratches I may or may not try and get removed.
#4
Le Mans Master
Re: Lookee what I found at a swap meet (gdh)
:smiliedrool: Wow those are beauties :thumbs: Nice find !
**EDIT** Just noticed a new smilely that fits perfect here :D
[Modified by SmokedTires, 8:14 PM 3/28/2004]
**EDIT** Just noticed a new smilely that fits perfect here :D
[Modified by SmokedTires, 8:14 PM 3/28/2004]
#6
Melting Slicks
Member Since: Nov 2002
Location: of mind
Posts: 2,371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lookee what I found at a swap meet (patsnitrovette)
I saw some of those in a local parts house yesterday. I was afraid to ask how much. Very nice! Bet they'll look good on your vette's motor.
#9
Re: Lookee what I found at a swap meet (AGVI)
those are DA SCHWIIIING!!!
I've been wanting to get a set just like that but I have height constraints because of accelerator pump rods. I see yours and angles on the sides, so can you do me a favor and measure the height of the covers? The total height and the height of the angled sections (basically a profile from a side view) ???
I've been wanting to get a set just like that but I have height constraints because of accelerator pump rods. I see yours and angles on the sides, so can you do me a favor and measure the height of the covers? The total height and the height of the angled sections (basically a profile from a side view) ???
#10
Safety Car
Re: Lookee what I found at a swap meet (MotorHead)
I have fabricated covers on mine, I think they are pretty cool looking.
About those scratches, most of the fabricated covers come with what they call "chemical" polishing, but basically it is a silver anodizing or something similar. If you want to try and sand and remove the scratches you may end up having to strip the whole cover and polishing it because if you sand one small area, you will break through the coating and you will deffinately notice it. Stripping is no big deal, some 320 grit, then 600, then 800 easily removed it, not a big deal, I did it on mine and came out nice.
Nick
About those scratches, most of the fabricated covers come with what they call "chemical" polishing, but basically it is a silver anodizing or something similar. If you want to try and sand and remove the scratches you may end up having to strip the whole cover and polishing it because if you sand one small area, you will break through the coating and you will deffinately notice it. Stripping is no big deal, some 320 grit, then 600, then 800 easily removed it, not a big deal, I did it on mine and came out nice.
Nick
#11
Race Director
Thread Starter
Re: Lookee what I found at a swap meet (lvrpool32)
Twin_Turbo -> The covers are :
3 3/4 in tall, the side angle starts a 2 3/4 in and goes up the 3 3/4 in max height.
The center max height is about 3 1/2 in wide while the whole cover is about
5 1/2 in wide.
I think you should be able to draw one with those measurements :D
3 3/4 in tall, the side angle starts a 2 3/4 in and goes up the 3 3/4 in max height.
The center max height is about 3 1/2 in wide while the whole cover is about
5 1/2 in wide.
I think you should be able to draw one with those measurements :D
#14
Burning Brakes
Re: Lookee what I found at a swap meet (MotorHead)
What a great find, congrats!
Here's what I got for valentines day from my hubby, I love my valve covers and breather caps!
:smiliedrool: :smiliedrool: :smiliedrool:
I love them!!!!
Here's what I got for valentines day from my hubby, I love my valve covers and breather caps!
:smiliedrool: :smiliedrool: :smiliedrool:
I love them!!!!
#15
Instructor
Member Since: Jan 2003
Location: Burlington Ontario
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lookee what I found at a swap meet (MotorHead)
MotorHead
Did you pick those up at the Rodmasters swap meet on the weekend? I seen a pair like those for sale there.
Jeff :cheers:
Did you pick those up at the Rodmasters swap meet on the weekend? I seen a pair like those for sale there.
Jeff :cheers:
#17
Race Director
Thread Starter
Re: Lookee what I found at a swap meet (Jeffski)
MotorHead
Did you pick those up at the Rodmasters swap meet on the weekend? I seen a pair like those for sale there.
Jeff :cheers:
Did you pick those up at the Rodmasters swap meet on the weekend? I seen a pair like those for sale there.
Jeff :cheers:
I'm going to put them on the MiniRat this weekend when I get shortblock finished to see how they look, I will post pics :D
[Modified by MotorHead, 6:24 PM 4/1/2004]