front end alignment and rear toe-in adjustment
03-19-2004, 04:59 PM
#1
Instructor
Thread Starter
front end alignment and rear toe-in adjustment
i was able to find specs on the cast, camber, and toe-in for the front and rear wheels however in todays automotive world everything is computerized and most of the time the computers don't go back far enough (72 vette) to give you the specs. I have the ideal settings however the computer needs minimum, maximum, and preferred settings for the cast, camber, and toe-in. So if anyone out there can give me the settings so they can setup the computer and i can get the car properly aligned and setup? Thanks
03-19-2004, 05:29 PM
#2
Race Director
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes
on
9 Posts
Re: front end alignment and rear toe-in adjustment (1972vettman)
There was a big discussion on this about a week ago. The specs were posted and discussed. Look back about a week. I don't remember who started the post.
03-19-2004, 07:15 PM
#3
Melting Slicks
Re: front end alignment and rear toe-in adjustment (1972vettman)
Check this web page out from VBP. This is what I used and my 72 and it handles great! http://www.vbandp.com/instructions/h...ruct/align.htm
