C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Man, am I in some trouble - Tall Driver (revisited)

Old 03-13-2004, 04:09 PM
  #1  
Rasch
Heel & Toe
Thread Starter
 
Rasch's Avatar
 
Member Since: Jan 2004
Location: Fayetteville GA
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default Man, am I in some trouble - Tall Driver (revisited)

Greetings!!
As some may remember, I put in a post several weeks ago about tall drivers and the C3 Vette. I got a ton of responses. Most of which told me to go and sit in one. Well today, I finally got the chance. I sat in an '82 with crossfire injection. To my total shock and amazement I FIT!!!!!! I had to move the seat all the way back of cource and truly I am going to have to watch the brake and gas since they are kinda close. This one did not have mirrored t-tops and the top didn't touch my head but it was pretty dang close. I have heard mirror'ed t-tops will give me a little more room. Is that true? Also do you think I would experience the same fit in older C3's or would it be different?

Thanks for taking the time to answer my questions.

RASCH :cool:
Old 03-13-2004, 04:30 PM
  #2  
MN-Brent
Safety Car

 
MN-Brent's Avatar
 
Member Since: Apr 2001
Location: Minneapolis, Mn USA
Posts: 4,992
Received 1 Like on 1 Post

Default Re: Man, am I in some trouble - Tall Driver (Rasch)

The deal with glass T-Tops is there is no inside liner to take up any space. So you have room all the way up to the glass. Im 6'1" and fit on the edge of comfortability on long drives in the 82.

You'll have to get out and stretch after a few hours for sure.

Ill I know about earlier C3s is the seats are not nearly as comfortable as the 78PC to 82 seats are, especially if you have power adjust for the drivers seat.

Brent...
Old 03-13-2004, 04:36 PM
  #3  
ZD75blue
Race Director
 
ZD75blue's Avatar
 
Member Since: Nov 2000
Location: NC,USA
Posts: 16,416
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Man, am I in some trouble - Tall Driver (MN-Brent)

I'm thinking about putting a "Spoon" gas pedal in mine similar to the old hotrods... Give me a little more room in the floor boards for the ol dogs!

Just an idear... :cheers:
Old 03-13-2004, 04:42 PM
  #4  
Jack71
Drifting
 
Jack71's Avatar
 
Member Since: Sep 2001
Location: Boxford Mass
Posts: 1,427
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (ZD75blue)

My old 74 seemed to have more room than my 71. Both side and leg room. It must have been the actual seat is all I can figure. Or I could be getting fat too. Just dunno.

I remember reading about some folks switching the brake pad to the smaller kind from a manual setup.
Old 03-13-2004, 05:00 PM
  #5  
Kevin Mason
Burning Brakes
 
Kevin Mason's Avatar
 
Member Since: Nov 2000
Posts: 827
Received 87 Likes on 54 Posts

Default Re: Man, am I in some trouble - Tall Driver (Jack71)

I am 6'4" and I fit in a '69 m/t fine, even wearing cowboy boots.

True- you wear the Vette like a glove, it is not like riding in a luxo-sled, but you get used to these things.
Old 03-13-2004, 05:31 PM
  #6  
killervette666
Drifting
 
killervette666's Avatar
 
Member Since: Nov 2003
Location: chicago IL
Posts: 1,410
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Man, am I in some trouble - Tall Driver (Kevin Mason)

I'm 6'2 and i fit PERFECT into my 79, snug as a glove and very comfortable :thumbs:
Old 03-13-2004, 06:08 PM
  #7  
CrossedFlags77
Drifting
 
CrossedFlags77's Avatar
 
Member Since: Feb 2003
Location: Allen TX
Posts: 1,461
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Man, am I in some trouble - Tall Driver (killervette666)

I am 6'3 and have no problem with fitting in my car. I took out the roof liners because they were sagging thus giving me more room. :thumbs:
Old 03-13-2004, 06:16 PM
  #8  
Armstrong
Burning Brakes
 
Armstrong's Avatar
 
Member Since: Dec 2001
Location: GA
Posts: 1,003
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (Rasch)

I'm 5'3" and fit in my 81 with room to spare :lol: :lol: :lol:
Old 03-13-2004, 07:26 PM
  #9  
ZD75blue
Race Director
 
ZD75blue's Avatar
 
Member Since: Nov 2000
Location: NC,USA
Posts: 16,416
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Man, am I in some trouble - Tall Driver (Armstrong)

I'm 5'3" and fit in my 81 with room to spare :lol: :lol: :lol:
Ah well... I guess you can grow into yours :jester
Old 03-13-2004, 08:16 PM
  #10  
1FUNVET
Burning Brakes
 
1FUNVET's Avatar
 
Member Since: Jan 2004
Location: Olney MD
Posts: 868
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Man, am I in some trouble - Tall Driver (Armstrong)

I'm 5'3" and fit in my 81 with room to spare :lol: :lol: :lol:
HAHA - me too I am also 5'3", and there is lots and lots of room in my 76. I take my seat all the way up and wish I could move it more LOL. I also make the steering wheel come all the way out too! :D :lolg: :lolg: :lolg: :lolg:
Old 03-13-2004, 08:29 PM
  #11  
Cali,68,L-79
Le Mans Master
 
Cali,68,L-79's Avatar
 
Member Since: Jan 2001
Location: San Diego CA
Posts: 6,938
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (1FUNVET)

just opposite. 6'4" 215lbs. barely squeeze into the 68. It has a undersized steering wheel and still hits my thighs. If I am turning left I have to go hand over hand since my leg gets in the way. Rolling up the left window is a chore and requires me to reach under my leg grab the crank (window crank guys) Basically I do not fit the car because I'm too tall but I love her anyway.
Old 03-13-2004, 09:01 PM
  #12  
Rasch
Heel & Toe
Thread Starter
 
Rasch's Avatar
 
Member Since: Jan 2004
Location: Fayetteville GA
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (killervette666)

I'm 6'2 and i fit PERFECT into my 79, snug as a glove and very comfortable :thumbs:
Yeah, I am beginning to really like the late 70's model. The one I sat in also had the tilt wheel which helped alot. Being 6'6" has it's disadvantages.


RASCH :)
Old 03-13-2004, 09:02 PM
  #13  
Rasch
Heel & Toe
Thread Starter
 
Rasch's Avatar
 
Member Since: Jan 2004
Location: Fayetteville GA
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (ZD75blue)

I'm thinking about putting a "Spoon" gas pedal in mine similar to the old hotrods... Give me a little more room in the floor boards for the ol dogs!

Just an idear... :cheers:
Where can you find them?

RASCH :)
Old 03-13-2004, 09:09 PM
  #14  
Armstrong
Burning Brakes
 
Armstrong's Avatar
 
Member Since: Dec 2001
Location: GA
Posts: 1,003
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (ZD75blue)

"Ah well... I guess you can grow into yours"

The only growin i'm doing is out not up which is what the Telescopic steering wheel is all about

:party: :party:
Old 03-13-2004, 10:20 PM
  #15  
A78Corvette
Burning Brakes
 
A78Corvette's Avatar
 
Member Since: Apr 2000
Location: Dixie TN
Posts: 1,076
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (Armstrong)

I changed the seats in my car from 78 style to 79 or up manual seats. They are much better seats. You didn't say what year your car is. Someone suggested power seats to you. I may be wrong but I think one side of the seat will sit higher unless you modify the floor pan for the motor. Thats why I like the regular seat rails. I have glass tops and T/T steering also. :conehead
Old 03-13-2004, 10:51 PM
  #16  
81' Corvette Guy
Burning Brakes
 
81' Corvette Guy's Avatar
 
Member Since: Dec 2002
Location: "Too Low, Too Fast, Too Loud" TX
Posts: 1,205
Likes: 0
Received 1 Like on 1 Post
Default Re: Man, am I in some trouble - Tall Driver (A78Corvette)

From what I have been told and seen, the power seats sit higher *with the seat powered all the way down, of course* than the manuals..have also heard that yes indeed, the floor pans are configured differently for the power seat vs. non powered seat cars. :steering:
Old 03-14-2004, 12:35 AM
  #17  
Rasch
Heel & Toe
Thread Starter
 
Rasch's Avatar
 
Member Since: Jan 2004
Location: Fayetteville GA
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (81' Corvette Guy)

From what I have been told and seen, the power seats sit higher *with the seat powered all the way down, of course* than the manuals..have also heard that yes indeed, the floor pans are configured differently for the power seat vs. non powered seat cars. :steering:
I will definitely keep that in mind. Thanks for the info :)
Old 03-14-2004, 09:52 AM
  #18  
ImBatman
Safety Car
 
ImBatman's Avatar
 
Member Since: Oct 2000
Location: Lake Wylie, South Carolina
Posts: 4,253
Received 161 Likes on 49 Posts

Default Re: Man, am I in some trouble - Tall Driver (Rasch)

6'6" 260lbs. I look like a bear on a tri cycle :eek: :smash: but still wouldn't trade the '71 for any other old hot rod. :cheers:
Old 03-14-2004, 09:56 AM
  #19  
mengbar
Instructor
 
mengbar's Avatar
 
Member Since: Dec 2002
Location: Lebanon TN
Posts: 125
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Man, am I in some trouble - Tall Driver (Rasch)

I'm a 6-2, 300 pounder. I fit in my manual seat 75 Stingray but shoulder room is a problem. I have a size 15 C shoe.....I'm making a mod on my brake pedal.

I really wanted a 4-speed, but the space restrictions on a vette just allows so much in the foot pedal area. I chose the automatic route.

My center console was shot from the previous owner using it as a exit/entry support. I plan to do the same, but will install a new console and include a little structural reinforcement under the console (engineeing....good stuff).

The things we do for our vettes. I've put myself on a protein diet to get back to battle-trim 245. But I never was average, so you have to make concessions if you like the car. My t-top liners are a problem. I'm hoping to find a pair of glass units at a good price before my car leaves my garage in about 18-months.

:smash: :smash: :seeya
:auto:
:party:

Get notified of new replies

To Man, am I in some trouble - Tall Driver (revisited)



Thread Tools
Search this Thread
Quick Reply: Man, am I in some trouble - Tall Driver (revisited)



All times are GMT -4. The time now is 12:46 AM.