Power window gear replacement.
10-13-2003, 12:52 PM
#1
Safety Car
Thread Starter
Member Since: Oct 2000
Location: Lake Wylie, South Carolina
Posts: 4,253
Received 161 Likes
on
49 Posts
Power window gear replacement.
Well I got the new PW motors, tracks and windows in. Also replaced the 30a breaker in the engine compartment. Found one problem though. Passenger side window works GREAT! :yesnod: Looks like the drivers side windo gear is going to have to be replaced. There are about 4 teeth either gone or ground down and the new motor skips when it its these areas. Has anyone used that kit that just replaces the teeth by bolting a new plate with teeth on top of the old one? The spring mechanism is good so I hate to tear the whole thing apart. What do you guys think?
[Modified by BlackRat, 11:54 AM 10/13/2003]
[Modified by BlackRat, 11:54 AM 10/13/2003]
10-13-2003, 08:02 PM
#4
Safety Car
Thread Starter
Member Since: Oct 2000
Location: Lake Wylie, South Carolina
Posts: 4,253
Received 161 Likes
on
49 Posts
Re: Power window gear replacement. (tzavaleta)
ttt = To the top. Was hoping that someone had just not seen my question. Guess that wasn't the case. :confused:
