"Bubba blast enclosure" or "What you can do with duct tape"
#1
Pro
Thread Starter
Member Since: Nov 2000
Location: Tucson AZ
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Bubba Blast Enclosure or What You Can Do With Duct Tape
I haven't posted for awhile but things are starting to settle down after my Wifes passing. I'm getting better at being both Mom and Dad every day and finding time to work on the Vette now.
I am in the process of sandblasting the frame and all parts for application of POR-15 and various topcoats. I didn't want to make a mess in the garage and get sand everywhere so I had to come up with something cheap and functional. Call me crazy but this is what I came up with and it works pretty good as a temporary enclosure.
I used an old house circulator and fashioned a duct from 3mil plastic and good old duct tape. It pulls cool fresh air from the house.
The ducts connect to a plastic covered frame sealed to the floor that inflates and exhausts through two 4 inch dryer hoses stuck under the garage door.
Here are some views of the inflated enclosure.
Here is a view of the air inlet from the ducted fan.
The frame sits in the inflated enclosure and the positive pressure provides a near dust free environment inside.
Inorder to keep from breathing any sand which is very bad, I had to come up with a way to breathe fresh air. I had an old hair dryer but it would only blow warm air. The motor in the hairdryer is a DC motor so I gutted it and connected it to my battery charger for power. It blows lots of cool fresh air.
I used an old pool hose to duct the air inside the enclosure.
I removed the respirator cartridges from an old mask and used some pvc fittings that I had laying around to channel fresh air into the mask. The mask connects to a vacuum cleaner hose connected to the pool hose.
The fresh air enters into both sides of the mask and provides positive pressure throughout the breathing process.
I'll post more as progress is made.
Craig
[Modified by VetteNut72, 1:44 PM 10/8/2003]
I am in the process of sandblasting the frame and all parts for application of POR-15 and various topcoats. I didn't want to make a mess in the garage and get sand everywhere so I had to come up with something cheap and functional. Call me crazy but this is what I came up with and it works pretty good as a temporary enclosure.
I used an old house circulator and fashioned a duct from 3mil plastic and good old duct tape. It pulls cool fresh air from the house.
The ducts connect to a plastic covered frame sealed to the floor that inflates and exhausts through two 4 inch dryer hoses stuck under the garage door.
Here are some views of the inflated enclosure.
Here is a view of the air inlet from the ducted fan.
The frame sits in the inflated enclosure and the positive pressure provides a near dust free environment inside.
Inorder to keep from breathing any sand which is very bad, I had to come up with a way to breathe fresh air. I had an old hair dryer but it would only blow warm air. The motor in the hairdryer is a DC motor so I gutted it and connected it to my battery charger for power. It blows lots of cool fresh air.
I used an old pool hose to duct the air inside the enclosure.
I removed the respirator cartridges from an old mask and used some pvc fittings that I had laying around to channel fresh air into the mask. The mask connects to a vacuum cleaner hose connected to the pool hose.
The fresh air enters into both sides of the mask and provides positive pressure throughout the breathing process.
I'll post more as progress is made.
Craig
[Modified by VetteNut72, 1:44 PM 10/8/2003]
#3
Safety Car
Member Since: Nov 1999
Location: Paducah KY
Posts: 4,466
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude Donor '03
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (VetteNut72)
Welcome home!
:cheers:
:cheers:
#5
Race Director
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (My69)
Pretty neat setup you have there. Good to see you back.
#8
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (Brettmc)
:withstupid: :withstupid:
That's not Bubba, that's pure McGyverism!! I love it. :thumbs: :thumbs:
[Modified by Twin_Turbo, 3:43 PM 10/8/2003]
That's not Bubba, that's pure McGyverism!! I love it. :thumbs: :thumbs:
[Modified by Twin_Turbo, 3:43 PM 10/8/2003]
#9
Le Mans Master
Member Since: Aug 2000
Location: Semper ubi, sub ubi
Posts: 9,662
Likes: 0
Received 6 Likes
on
6 Posts
Cruise-In VI Veteran
Cruise-In VII Veteran
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (VetteNut72)
Super-fricken-dooper!!! That's what I call ingenuity, now I know how to pipe a/c into my garage next summer!
#10
Burning Brakes
Member Since: Dec 2002
Location: "Too Low, Too Fast, Too Loud" TX
Posts: 1,205
Likes: 0
Received 1 Like
on
1 Post
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (Smokehouse69)
Go Go Inspector Gadget...pretty smart set up...crude, but smart. I like it! Our prayers are with you getting over this hard time and am sure you are doing a fine job with the kids..take care and God Bless! :blueangel:
#13
Race Director
Member Since: Jun 2001
Location: The Only Corvette in Gila Bend, Az.
Posts: 16,483
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '09
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (Jay M)
It's Craig MacGyver.
Really glad to see you working on your Corvette again. And we are all happy to see you posting again, Keep it up. And stay strong for your kids.
:seeya
Really glad to see you working on your Corvette again. And we are all happy to see you posting again, Keep it up. And stay strong for your kids.
:seeya
#14
Team Owner
Member Since: May 2001
Location: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
Posts: 29,745
Likes: 0
Received 2 Likes
on
2 Posts
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (Jay M)
I am sooooo glad to see you up and moving again on the car. I am even happier to see you posting here again.
My wife asked about you just yesterday and I was thinking of dropping you an e-mail to check in on you and see how things were going.
I looks to be o.k. if you still have the Vette and you have the time and energy to get back to working on it.
If you want some help working on it over a weekend, let me know. I bet I could get some of these PHX area guys to come down for a day of wrenching, blasting or just general :bs .
I have not been in the Tucson area lately for work, but if I am, I will drop buy. E-mail me your phone number if you want, and I can call and give you advanced warning.
Nice to see you back.
--- Bryan ----
P.S. Very :cool: blasting / painting area. You win the McGuyver award of the year for that one.
My wife asked about you just yesterday and I was thinking of dropping you an e-mail to check in on you and see how things were going.
I looks to be o.k. if you still have the Vette and you have the time and energy to get back to working on it.
If you want some help working on it over a weekend, let me know. I bet I could get some of these PHX area guys to come down for a day of wrenching, blasting or just general :bs .
I have not been in the Tucson area lately for work, but if I am, I will drop buy. E-mail me your phone number if you want, and I can call and give you advanced warning.
Nice to see you back.
--- Bryan ----
P.S. Very :cool: blasting / painting area. You win the McGuyver award of the year for that one.
#15
Le Mans Master
Re: Bubba Blast Enclosure or What You Can Do With Duct Tape (VetteNut72)
Hey bud, good to see you here again, been thinking about you and the kids. Looks like a great setup you have rigged up. :thumbs: