For those considering a TILT FRONT CONVERSION for their C3..
09-29-2003, 01:50 PM
#1
Team Owner
Thread Starter
For those considering a TILT FRONT CONVERSION for their C3..
I just found this auction for a tilt front end for a C3!!
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2435033373
The price is right too.. It's at only $102 right now...
[Modified by GrandSportC3, 1:52 PM 9/29/2003]
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2435033373
The price is right too.. It's at only $102 right now...
[Modified by GrandSportC3, 1:52 PM 9/29/2003]
09-29-2003, 03:09 PM
#3
Team Owner
Thread Starter
Re: For those considering a TILT FRONT CONVERSION for their C3.. (Fevre)
That is near me, too bad I don't want it.
09-29-2003, 03:44 PM
#4
Team Owner
Re: For those considering a TILT FRONT CONVERSION for their C3.. (GrandSportC3)
Oliver,
IM Glenn (74-Roadster) I know he was talking about a tilt front end for his car at one point.
John
IM Glenn (74-Roadster) I know he was talking about a tilt front end for his car at one point.
John
09-29-2003, 03:46 PM
#5
Team Owner
Thread Starter
Re: For those considering a TILT FRONT CONVERSION for their C3.. (theandies)
Oliver,
IM Glenn (74-Roadster) I know he was talking about a tilt front end for his car at one point.
John
IM Glenn (74-Roadster) I know he was talking about a tilt front end for his car at one point.
John
09-29-2003, 04:26 PM
#6
Le Mans Master
Re: For those considering a TILT FRONT CONVERSION for their C3.. (theandies)
Thanks John!!!
But it's too far away and no hardware, so I'll pass. Building the nose isn't too hard, just time and effort. Engineering a hinge assembly, mounts and latches is a much more difficult task. I'd pay $$ for quality hardware since bolt-on stuff would save a lot of time.
But it's too far away and no hardware, so I'll pass. Building the nose isn't too hard, just time and effort. Engineering a hinge assembly, mounts and latches is a much more difficult task. I'd pay $$ for quality hardware since bolt-on stuff would save a lot of time.
09-29-2003, 04:46 PM
#8
Re: For those considering a TILT FRONT CONVERSION for their C3.. (zZArAZz)
As far as I know the hardware isn't made anymore, you'd either have to get lucky on ebay or make it yourself.
09-29-2003, 05:10 PM
#9
Team Owner
Thread Starter
Re: For those considering a TILT FRONT CONVERSION for their C3.. (Twin_Turbo)
As far as I know the hardware isn't made anymore, you'd either have to get lucky on ebay or make it yourself.
