Getting real close to knocking this project out!
#1
Platinum Supporting Dealership
Thread Starter
Getting real close to knocking this project out!
...of the garage at least!!
http://vettefinders.com/index.cfm?fuseaction=79part23
We hope to get the body back on in the next couple weeks.
http://vettefinders.com/index.cfm?fuseaction=79part23
We hope to get the body back on in the next couple weeks.
#2
Race Director
Re: Getting real close to knocking this project out! (Chris@VetteFinders)
:thumbs:
I'm amazed as always. Waiting patiently for every next step! Looks great.
-Steve
I'm amazed as always. Waiting patiently for every next step! Looks great.
-Steve
#3
Safety Car
Member Since: Jun 2002
Location: Pearland TX
Posts: 4,844
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Contributor
Re: Getting real close to knocking this project out! (Chris@VetteFinders)
Chris,
It's gotta be alot of fun working on these C-3's with the body off and nothing keeping you from doing things right. Then again... I guess it gets more costly as you don't want to put the body back on until everything is just the way you want it. If you have gone this far why not take a little extra time and money and never question what you did.
Kudos on the work! :cheers:
It's gotta be alot of fun working on these C-3's with the body off and nothing keeping you from doing things right. Then again... I guess it gets more costly as you don't want to put the body back on until everything is just the way you want it. If you have gone this far why not take a little extra time and money and never question what you did.
Kudos on the work! :cheers:
#4
Melting Slicks
Member Since: Jan 2003
Location: OKC Oklahoma
Posts: 2,804
Likes: 0
Received 0 Likes
on
0 Posts
Re: Getting real close to knocking this project out! (Chris@VetteFinders)
You guys are doing a great job. My frame is cracked in the same place. I bought a tower brace from Van Steel to hopefully keep this from happening again after I get it welded. I have the engine and suspension off right now. Anyway, are those the Dynomax headers? That engine looks really nice. The upgrades should add some punch. Full speed ahead!! :chevy :thumbs: