Rich80

Noticed a miss when under acceleration the other night. Popped the hood and traced the wires pulling a little on each one. The miss seem to go away. Darn those wires get hot when shes up to temperature. Can barely touch them. Any way does anyone have any suggestions on a good quality set of wires. The ones I have in there I think were from Pep Boys (Cheapies) and I didnt rout them under the shields cause the engine leaks oil. The ones I pulled out of there were covered in oil....

Twin_Turbo

oil on wires is not good so if you get new ones route them like you have now. I'd get some MSD or Taylow wires.