Need firewall pics to see what grommet goes where for a 78 vette
08-14-2003, 10:35 PM
#1
Drifting
Thread Starter
Member Since: Feb 2000
Location: Clarksville,Tn,USA TN
Posts: 1,607
Likes: 0
Received 0 Likes
on
0 Posts
Need firewall pics to see what grommet goes where for a 78 vette
Starting from the mastercylinder side going to the heater blower motor what goes through the firewall where. I have a 78 corvette automatic with cruise control. My car has been apart for over 3 years and everything is scattered everywhere. No wiring in the vette or anything. I am getting ready to heat barrier the inside and install the steering column.
I assume the hole next to the firewall to the right of the master cylinder as you stand in front of the car is the speedo cable going to the transducer.
Next there is 2 holes kinds facing each other and the accelerator cable hole next to them. I imagine one of them is for the vacuum hose feeding the cruise system. You know what I mean...
Anyone have some pics posted somewhere with the info..
If you click on the first pic it will enlare to see the holes
Thanks for any help,
Anyone who would like to send me some pics Please do at... nomad2day@charter.net
I have a cable modem so pic size is unimportant.
Neil in Tenn
[Modified by Nomad78SA, 12:07 PM 8/16/2003]
I assume the hole next to the firewall to the right of the master cylinder as you stand in front of the car is the speedo cable going to the transducer.
Next there is 2 holes kinds facing each other and the accelerator cable hole next to them. I imagine one of them is for the vacuum hose feeding the cruise system. You know what I mean...
Anyone have some pics posted somewhere with the info..
If you click on the first pic it will enlare to see the holes
Thanks for any help,
Anyone who would like to send me some pics Please do at... nomad2day@charter.net
I have a cable modem so pic size is unimportant.
Neil in Tenn
[Modified by Nomad78SA, 12:07 PM 8/16/2003]
08-14-2003, 11:15 PM
#2
Safety Car
Re: Need firewall pics to see what grommet goes where for a 78 vette (Nomad78SA)
I can snap some pics of my 80 tommorrow if no one else can help.
08-15-2003, 12:25 AM
#3
Le Mans Master
Re: Need firewall pics to see what grommet goes where for a 78 vette (LAvetteman)
Neil,
Remind me tomorrow and I'll take detailed pics and send you copies from the AIM if you don't have it. I need to hit the sack. Rouch day in NY tody and it's 12:25am. I have to try and make it back into the city at 6am.
Joe..
Remind me tomorrow and I'll take detailed pics and send you copies from the AIM if you don't have it. I need to hit the sack. Rouch day in NY tody and it's 12:25am. I have to try and make it back into the city at 6am.
Joe..
08-15-2003, 07:02 AM
#4
Melting Slicks
Member Since: Dec 2002
Location: Dayton Area Ohio
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '08
Re: Need firewall pics to see what grommet goes where for a 78 vette (Nomad78SA)
Neil,
Send me your email and I'll take all you need. It's a lot easier emailing than uploading them on my site. mine is guppie@highstream.net :cheers:
Send me your email and I'll take all you need. It's a lot easier emailing than uploading them on my site. mine is guppie@highstream.net :cheers:
08-15-2003, 10:36 AM
#5
Drifting
Thread Starter
Member Since: Feb 2000
Location: Clarksville,Tn,USA TN
Posts: 1,607
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need firewall pics to see what grommet goes where for a 78 vette (guppie)
Guppie
I sent you a e-mail...Thanks..
Thanks Joe..Detailed pics are the ticket..That I can use
Joe, I have a assembly manual but it seems vague in this info.. I am still trying to figure out which way the speedo grommet goes in and faces too.
If I had a few pics both on the inside of the firewall and outside it would answer my questions and OTHER questions on how everything ties in. The inside of the vette is gutted and I am needing to get the firewall stuff done so I can heat bearier in and the steering column.
Anyone who would like to send me some pics Please do at... nomad2day@charter.net
I have a cable modem so pic size is unimportant.
Neil in Tenn
[Modified by Nomad78SA, 9:15 PM 8/15/2003]
I sent you a e-mail...Thanks..
Thanks Joe..Detailed pics are the ticket..That I can use
Joe, I have a assembly manual but it seems vague in this info.. I am still trying to figure out which way the speedo grommet goes in and faces too.
If I had a few pics both on the inside of the firewall and outside it would answer my questions and OTHER questions on how everything ties in. The inside of the vette is gutted and I am needing to get the firewall stuff done so I can heat bearier in and the steering column.
Anyone who would like to send me some pics Please do at... nomad2day@charter.net
I have a cable modem so pic size is unimportant.
Neil in Tenn
[Modified by Nomad78SA, 9:15 PM 8/15/2003]
08-15-2003, 10:23 PM
#6
Drifting
Thread Starter
Member Since: Feb 2000
Location: Clarksville,Tn,USA TN
Posts: 1,607
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need firewall pics to see what grommet goes where for a 78 vette (Nomad78SA)
Don't everyone jump in here at once..I might have to go out into the garage and do some of the work I have asked about.. :lol:
So, anyone got a open hood they can look under for me?
Thanks for any help, :thumbs:
Neil in Tenn
So, anyone got a open hood they can look under for me?
Thanks for any help, :thumbs:
Neil in Tenn
08-16-2003, 06:08 AM
#7
Melting Slicks
Member Since: Dec 2002
Location: Dayton Area Ohio
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '08
Re: Need firewall pics to see what grommet goes where for a 78 vette (Nomad78SA)
Neil,
I sent some pics to you, Not sure how good they were or if the right area.
I didn't get your email till 6:00am and was trying to get ready for a show today. I'll be home this afternoon if you need more and better pics...Ron :cheers:
I sent some pics to you, Not sure how good they were or if the right area.
I didn't get your email till 6:00am and was trying to get ready for a show today. I'll be home this afternoon if you need more and better pics...Ron :cheers:
08-16-2003, 01:05 PM
#9
Drifting
Thread Starter
Member Since: Feb 2000
Location: Clarksville,Tn,USA TN
Posts: 1,607
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need firewall pics to see what grommet goes where for a 78 vette (guppie)
Ron,
I didn't get your e-mail :cry
Joe I got yours and it explained one of mine grommet questions.
Here is a pic with arrows to show the ones I am looking for.
Thanks as always,
Neil in Tenn
I didn't get your e-mail :cry
Joe I got yours and it explained one of mine grommet questions.
Here is a pic with arrows to show the ones I am looking for.
Thanks as always,
Neil in Tenn
