I have a nice box. You can too.
08-14-2003, 05:50 PM
#1
Le Mans Master
Thread Starter
I have a nice box. You can too.
Well, this post should push the limits of the hit-o-meter with that title.
Here at work, we get parts for our ultrasound imagers, and they come in a
nice blow-molded plastic box. The box has poly foam inserts that are egg-
crate cut. A piece is glued to the top inside, and another just sits in the
bottom. There are two snap closures on the front to keep contents secure.
These are great for anyone doing resto work on their cars. Say you are
removing the gas tank. I fit all the hardware, bumper brackets and straps
from my tank removal in one box. Also good to hold pistols, tools, electronic
meters, etc.
I don't think they are worth the $ to ship them - but I can - if you want.
If you are in the area of Burlington,MA or Nashua, NH - then you can stop by
and grab one - or a bunch. Currently, I'm sitting on about 200-300 boxes.
Here are a few pics:
:seeya
[Modified by NHvette, 5:54 PM 8/14/2003]
Here at work, we get parts for our ultrasound imagers, and they come in a
nice blow-molded plastic box. The box has poly foam inserts that are egg-
crate cut. A piece is glued to the top inside, and another just sits in the
bottom. There are two snap closures on the front to keep contents secure.
These are great for anyone doing resto work on their cars. Say you are
removing the gas tank. I fit all the hardware, bumper brackets and straps
from my tank removal in one box. Also good to hold pistols, tools, electronic
meters, etc.
I don't think they are worth the $ to ship them - but I can - if you want.
If you are in the area of Burlington,MA or Nashua, NH - then you can stop by
and grab one - or a bunch. Currently, I'm sitting on about 200-300 boxes.
Here are a few pics:
:seeya
[Modified by NHvette, 5:54 PM 8/14/2003]
08-14-2003, 06:29 PM
#2
Team Owner
Member Since: May 2001
Location: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
Posts: 29,745
Likes: 0
Received 2 Likes
on
2 Posts
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Re: I have a nice box. You can too. (NHvette)
Hey there !! I will be in Burlington, MA. next week for work. Can I stop by, see your car and grab a few boxes from you ???
08-14-2003, 07:04 PM
#3
Instructor
Member Since: Jul 2003
Location: methuen ma
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Re: I have a nice box. You can too. (BSeery)
They look pretty good, the boxes... I'm not so sure about Daves wheels though !!
But Ill take a couple as well . To BSERERY..I also work in the next town over from Dave ,let me know when you get in town ..too bad you didn't come in last week you missed an awesome Pigraost at Dave's last weekend!
But Ill take a couple as well . To BSERERY..I also work in the next town over from Dave ,let me know when you get in town ..too bad you didn't come in last week you missed an awesome Pigraost at Dave's last weekend!
08-14-2003, 09:51 PM
#4
Pro
Member Since: Jul 2002
Location: Orlando Fl
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Re: I have a nice box. You can too. (NHvette)
Hey Dave...are they deep enough to hold compressor tools like an impact gun or a ratchet? If so, I would like to get a couple.
Thanks!
Thanks!
08-14-2003, 10:18 PM
#5
Le Mans Master
Thread Starter
Re: I have a nice box. You can too. (Fasteighty)
Yup - they'll hold a 1/2" gun - no problem.
Hey Packy - I meant to offer them to you guys right there - but with all the
action it slipped my mind. I had about 10 sitting in the garage.
Hey Packy - I meant to offer them to you guys right there - but with all the
action it slipped my mind. I had about 10 sitting in the garage.
08-14-2003, 10:29 PM
#6
Melting Slicks
Member Since: Aug 2000
Posts: 2,310
Likes: 0
Received 0 Likes
on
0 Posts
Re: I have a nice box. You can too. (NHvette)
Hmmm... I was thinking fresh air box, always an interesting topic.
That'd be a nice box for air tools too. I have my air chisel sitting with the bits on the bench, not a great place in my garage :rolleyes:
That'd be a nice box for air tools too. I have my air chisel sitting with the bits on the bench, not a great place in my garage :rolleyes:
08-15-2003, 10:40 AM
#7
Advanced
Member Since: Apr 2003
Location: North Andover MA
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: I have a nice box. You can too. (NHvette)
These things look perfect for wax bottles and rages and of course the tools.
Dave, You around this afternoon? I work in Concord and can cut out early.
Dave, You around this afternoon? I work in Concord and can cut out early.
