NEW USER
08-13-2003, 03:40 AM
#1
5th Gear
Thread Starter
Member Since: Aug 2003
Location: Waianae HI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
NEW USER
:cool: Hello I am new to the site but have always owned a 77 Vette.
Calling Cappy if you are out there and still are trying to sell those slicks send me an email.
Manny
Calling Cappy if you are out there and still are trying to sell those slicks send me an email.
Manny
08-13-2003, 04:31 AM
#2
Re: NEW USER (whiteae)
Aloha. If you just want to make a couple of runs one night, you can borrow my BFGoodrich drag radials. I am right around the corner from Campbell. Welcome to the forum, what color is your vette?
08-13-2003, 06:00 AM
#6
Re: NEW USER (bnytro)
Welcome to you also. What parts are you looking for, Cappy knows people who knows people that can get parts from people who know people. :D :jester
08-14-2003, 02:48 AM
#10
Instructor
Member Since: Dec 2001
Location: Kona Hi
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEW USER (Maurice)
Welcome to you also. What parts are you looking for, Cappy knows people who knows people that can get parts from people who know people. :D :jester
Maurice, you ever buy that Camaro?
Welcome guys :cheers:
[Modified by Chevyguy, 9:49 PM 8/13/2003]
08-14-2003, 03:11 AM
#12
5th Gear
Thread Starter
Member Since: Aug 2003
Location: Waianae HI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEW USER (Maurice)
Maurice
the color is orange with a 406 small block AFR heads roller cam built turbo 400 trans with stall 13.3 quickest after 4 runs the car just not hooking very well wanting to try a set of 28" slicks to reach out and touch the 12's
the color is orange with a 406 small block AFR heads roller cam built turbo 400 trans with stall 13.3 quickest after 4 runs the car just not hooking very well wanting to try a set of 28" slicks to reach out and touch the 12's
08-14-2003, 06:06 AM
#13
Drifting
Member Since: May 2003
Location: Melbourne, Victoria, Australia, the World
Posts: 1,634
Likes: 0
Received 2 Likes
on
1 Post
Re: NEW USER (Desertdawg)
Hi to the new guys!
I thought we were doing the big trip for the 50th.
There was a guy from Hawaii WITH HIS MIDYEAR .
He shipped his car to LA and drove it to Bowling Green for the celebrations.
Any of you islanders know him?
If so give him the big "thumbs up" from the Aussies.
regards,
Cap'n James (retired)
Cool 2 new guys in one thread. Now all we need to do is get them to cruise over for a :cheers:
There was a guy from Hawaii WITH HIS MIDYEAR .
He shipped his car to LA and drove it to Bowling Green for the celebrations.
Any of you islanders know him?
If so give him the big "thumbs up" from the Aussies.
regards,
Cap'n James (retired)
08-14-2003, 02:08 PM
#17
Re: NEW USER (whiteae)
AHHH, didn't I let you borrow my drag radials one time at the track? It was quite a few months ago, it could have been your first time out? I think I saw you out their the other night also making passes and yes you need better traction.
08-15-2003, 04:56 AM
#19
Race Director
Re: NEW USER (Maurice)
I can be reached....479-2188........Still have the MT ET Streets....Brand new never raced....Put on car drove around the block....rubbed on inside frame....removed and bought a set that fit perfect.
I have 1981 trailing arms removed when I installed offset trailing arms from Van Steel. Also have 1981 Vette rear end removed when I installed 3:70 from Mid America.
Have Acel HEI distributor and a brand new Petronix FlameThrower HEI.
Maurice, you still want the Red Top Optima?
I have the Beck Racing 383 Max Velocity Plus Engine Block.
Edlebrock RPM Air Gap Manifold with 750 cfm Carb.
Timing chain covers galore, Steel, Aluminum, Chrome.
1981 Vette Valve Covers with Crinkle Black Paint finish.
Maurice, I may have to use the air tools before Gkull arrives.
I have 1981 trailing arms removed when I installed offset trailing arms from Van Steel. Also have 1981 Vette rear end removed when I installed 3:70 from Mid America.
Have Acel HEI distributor and a brand new Petronix FlameThrower HEI.
Maurice, you still want the Red Top Optima?
I have the Beck Racing 383 Max Velocity Plus Engine Block.
Edlebrock RPM Air Gap Manifold with 750 cfm Carb.
Timing chain covers galore, Steel, Aluminum, Chrome.
1981 Vette Valve Covers with Crinkle Black Paint finish.
Maurice, I may have to use the air tools before Gkull arrives.
08-15-2003, 05:05 AM
#20
Re: NEW USER (8T1-7T9 BIONIC VETTE)
Yes I still want the battery. Can I come tomorrow and pick it up? When is gkull coming? I am going on a trip to NYC / DC leaving wednesday for 10 days that just came up. I can bring everything over before if he will be here during that time. Let me know, I will talk to you tomorrow.