C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Tach Rebuild

Thread Tools
 
Search this Thread
 
Old 08-11-2003, 01:07 PM
  #1  
'75sting
Advanced
Thread Starter
 
'75sting's Avatar
 
Member Since: Jul 2003
Location: Aberdeen NC
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default Tach Rebuild

My Tach On My Car Was Not Working, So I Took It Out To See What The Problem Was And I Found A Diode Was Cracked. So I Took The Board To A "TV Repair Shop" And Got It Fixed For $5.00, Sure Beats The Crap Out Of Paying About $90.00 For A New Board. So If You Have One That Isn't Working Try The TV Repair Shop First.
Old 08-11-2003, 01:14 PM
  #2  
Glutamine83
Racer
 
Glutamine83's Avatar
 
Member Since: Dec 2002
Posts: 367
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Tach Rebuild ('75sting)

interesting, my tach doesn't work either, i should do the same thing, although I can imagine bubba putting his fingers all over the face of the gauge and mangling it ............. :mad
Old 08-11-2003, 01:20 PM
  #3  
'75sting
Advanced
Thread Starter
 
'75sting's Avatar
 
Member Since: Jul 2003
Location: Aberdeen NC
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Tach Rebuild (Glutamine83)

Don't Let Bubba Touch The Face Plate, Just Unbolt The Board From The Back Of The Housing And Take The Board To Bubba.
Old 08-11-2003, 02:27 PM
  #4  
dath
Burning Brakes
 
dath's Avatar
 
Member Since: Jul 2000
Location: Beaverton, OR
Posts: 1,162
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Tach Rebuild ('75sting)

Don't Let Bubba Touch The Face Plate, Just Unbolt The Board From The Back Of The Housing And Take The Board To Bubba.
Or for that matter, just do it yourself if you can find the source of the problem. It's not difficult to remove and solder in a new diode (or most other components)...

Get notified of new replies

To Tach Rebuild




Quick Reply: Tach Rebuild



All times are GMT -4. The time now is 07:16 PM.