How big can you bore a 502 block?
#1
Race Director
Thread Starter
Member Since: May 2003
Location: Science Bitch! Mississauga, Ontario
Posts: 11,814
Likes: 0
Received 7 Likes
on
7 Posts
Canadian Events Coordinator
How big can you bore a 502 block?
I was wondering how big a bore the 502 block can take. I know it sounds a little extreme, but why not? thanks, Les
#2
Burning Brakes
Member Since: Dec 1999
Location: Silver Spring, Md.
Posts: 1,088
Likes: 0
Received 0 Likes
on
0 Posts
Re: How big can you bore a 502 block? (AGVI)
The Merling block, http://www.worldcastings.com will bore out to 4.625, and GM's will go to 4.60.
#3
Race Director
Member Since: Jan 2000
Location: Corsicana, Tx
Posts: 12,617
Received 1,878 Likes
on
916 Posts
2020 C2 of the Year - Modified Winner
2020 Corvette of the Year (performance mods)
C2 of Year Winner (performance mods) 2019
2017 C2 of Year Finalist
Re: How big can you bore a 502 block? (AGVI)
Most folks only seem to take the 502 blocks out to 4.500. That's .030 over. Now if you get a Bowtie block that's a whole 'nuther deal...probably the 4.600.
The Merlins will go 4.625 as mentioned.
If you know where a used 502 block is that needs boring, I know someone with a real nice set of used 4.500 pistons for one.
JIM
The Merlins will go 4.625 as mentioned.
If you know where a used 502 block is that needs boring, I know someone with a real nice set of used 4.500 pistons for one.
JIM