Bubba at work
#1
Melting Slicks
Thread Starter
Member Since: Oct 2002
Posts: 2,106
Likes: 0
Received 0 Likes
on
0 Posts
Bubba at work
Here is a cheap way to fix your broken reverse lockout.
that is a $.20 peice of pipe that my grandpa ground down with a rotary tool to allow the t-bar to fit. Other bubba modifications this week include using a nail in place of a key to secure the cranshaft of my brother tractor to the flywheel using hot glue and a few strokes of sandpaper to secure the lens for my "corvette" lights.
edit** should i submit this for a tech article? :lolg:
[Modified by battsup, 6:38 PM 7/22/2003]
that is a $.20 peice of pipe that my grandpa ground down with a rotary tool to allow the t-bar to fit. Other bubba modifications this week include using a nail in place of a key to secure the cranshaft of my brother tractor to the flywheel using hot glue and a few strokes of sandpaper to secure the lens for my "corvette" lights.
edit** should i submit this for a tech article? :lolg:
[Modified by battsup, 6:38 PM 7/22/2003]