New Frame Rail Pics
#1
Burning Brakes
Thread Starter
New Frame Rail Pics
Thought I'd share some pics of the newly installed passenger side frame rail section & some before & after pics.
Before: http://www.cruzconsulting.com/images/car/IMG_1676.JPG
After: http://www.cruzconsulting.com/images/car/IMG_2401.JPG
Before: http://www.cruzconsulting.com/images/car/IMG_1684.JPG
After: http://www.cruzconsulting.com/images/car/IMG_2422.JPG
[Modified by mdsmith, 1:00 AM 7/13/2003]
Before: http://www.cruzconsulting.com/images/car/IMG_1676.JPG
After: http://www.cruzconsulting.com/images/car/IMG_2401.JPG
Before: http://www.cruzconsulting.com/images/car/IMG_1684.JPG
After: http://www.cruzconsulting.com/images/car/IMG_2422.JPG
[Modified by mdsmith, 1:00 AM 7/13/2003]
#3
Safety Car
Re: New Frame Rail Pics (Brutus)
Nice. :cool: Did you do the work yourself? I ask because I have done this repair myself a couple of times, and thought that it really wasn't that bad. That's a nice welding job you've got there as well. :cheers:
-Justin
-Justin
#5
Burning Brakes
Thread Starter
Re: New Frame Rail Pics (Dalannex)
I removed the old rail & mocked up the new pieces. I had a welder with a mobile setup do all the welds in stainless. Very pleased with the quality! Removed the other rail yesterday...hope to have it ready for welding next week.
#6
Team Owner
Member Since: May 2001
Location: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
Posts: 29,745
Likes: 0
Received 2 Likes
on
2 Posts
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Re: New Frame Rail Pics (mdsmith)
Very :cool: !
:thumbs: :thumbs:
:thumbs: :thumbs:
#12
Burning Brakes
Thread Starter
Re: New Frame Rail Pics (stpman)
Nice work, where did you get the new pieces from?
Steve :steering:
Steve :steering:
#13
Safety Car
Re: New Frame Rail Pics (mdsmith)
Your welder must have TIG welded the seams then huh? :cool: IMO that's the way to go. That's my favorite welder anyway.
-Justin
-Justin
#15
Burning Brakes
Thread Starter
Re: New Frame Rail Pics (Dalannex)
Your welder must have TIG welded the seams then huh? :cool: IMO that's the way to go. That's my favorite welder anyway.
-Justin
-Justin
#17
Tech Contributor
Re: New Frame Rail Pics (mdsmith)
nice work :cheers:
Gary
Gary
#20
Le Mans Master
Re: New Frame Rail Pics (mdsmith)
Wow, that looks really nice. I'm very impressed with those welds. The rest of the frame is looking better, too. I see that you have been cleaning and painting quite a bit.