An exhaust/dirty plug question
07-11-2003, 11:19 AM
#1
Drifting
Thread Starter
An exhaust/dirty plug question
I had an exhaust leak around cylinders 6 and 4. I also had a plug come out of 6 that was covered in carbon causing a miss in my engine. My question is can an exhaust leak contribute to the plug getting crudded up or am I looking at a valve job somewhere down the road? Let the wisdom flow forth!
CVT4ME :cheers:
CVT4ME :cheers:
07-13-2003, 04:03 AM
#3
Race Director
Member Since: Jun 2001
Location: The Only Corvette in Gila Bend, Az.
Posts: 16,483
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '09
Re: An exhaust/dirty plug question (CVT4ME)
The exhaust leak shouldn't affect the plug. Check your cap, rotor, and wires, then start thinking about the inside of the motor.
07-13-2003, 01:44 PM
#4
Drifting
Thread Starter
Re: An exhaust/dirty plug question (Desertdawg)
Thanks Desertdawg, that was what I was afraid of. I have new ignition wires and got the exhaust leak fixed and the car is running and sounding a ton better. I just wonder how many miles will go by before I have to pull the plug on #6 and clean the carbon off of it to get the engine to bang on all eight. Time to start looking at those Vortec heads I have been hearing so much about.
CVT4ME
CVT4ME