C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Need HELP from Atlanta Corvetters...

Thread Tools
 
Search this Thread
 
Old 07-06-2003, 11:34 PM
  #1  
rainman69
Drifting
Thread Starter
 
rainman69's Avatar
 
Member Since: Oct 2001
Location: Westampton NJ
Posts: 1,699
Likes: 0
Received 1 Like on 1 Post

Default Need HELP from Atlanta Corvetters...

Um...anyone in the Atlanta area, near exits 75 thru 70 of I-20W? I lost a rather large piece of my car there, and couldn't stop to get it back. If you could pick it up for me, I'll pay you to send it back to me.

I can be reached through this post, and at david dot henze at 1969corvettes dot com.
Old 07-06-2003, 11:51 PM
  #2  
DJ Serotonin
Advanced
 
DJ Serotonin's Avatar
 
Member Since: Feb 2002
Location: Athens Ga
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Need HELP from Atlanta Corvetters... (rainman69)

I live in Athens.. how far is it from there approximately? and exactly how large of a piece are we talking about :) :eek:
Old 07-07-2003, 01:27 AM
  #3  
rainman69
Drifting
Thread Starter
 
rainman69's Avatar
 
Member Since: Oct 2001
Location: Westampton NJ
Posts: 1,699
Likes: 0
Received 1 Like on 1 Post

Default Re: Need HELP from Atlanta Corvetters... (DJ Serotonin)

Mapquest says you're about an hour+ away. And we're talking about...oh...a fender. Long story, short version: the bonding material didn't work too well...so, I'm out of the fiberglass repair on my own...

:sad:
Old 07-07-2003, 09:39 AM
  #4  
BB68Vett
Burning Brakes
 
BB68Vett's Avatar
 
Member Since: Feb 2001
Location: Marietta GA
Posts: 927
Received 5 Likes on 5 Posts

Default Re: Need HELP from Atlanta Corvetters... (rainman69)

It looks like you lost it between Turner Hill Road and the Atlanta International Golf and Country Club. I am not that close but I would be willing to make the trip for you but I want to make sure no one else from the Forum has already done so. Then it is a wasted trip. Which side of the road did it end up on? Do you think the fiberglass fender could withstand being blown off, etc. at 60+ mph? It might just be dust by now. IM me to discuss.
Old 07-07-2003, 09:42 AM
  #5  
Alwyn678
Team Owner
 
Alwyn678's Avatar
 
Member Since: Jun 2001
Location: Thomson Georgia
Posts: 43,085
Received 141 Likes on 124 Posts

Default Re: Need HELP from Atlanta Corvetters... (BB68Vett)

DAMN........I would also be glad to try and help....Let me know
Old 07-07-2003, 11:56 AM
  #6  
rainman69
Drifting
Thread Starter
 
rainman69's Avatar
 
Member Since: Oct 2001
Location: Westampton NJ
Posts: 1,699
Likes: 0
Received 1 Like on 1 Post

Default Re: Need HELP from Atlanta Corvetters... (BB68Vett)

Nobody has contacted me about it yet, so I guess it's either of you two right now, so I'll reply via post to keep everyone up to date.

I saw it land in the rear view mirror, and it appeared to land in one piece. My main concern is retrieving the side marker light from the fender as it is original, while the fender is not...but if the fender is still good, I'd like to get it back as well.

If someone is able to pick it up, please post here when you do so that nobody duplicates effort. Thanks!
Old 07-07-2003, 01:06 PM
  #7  
BB68Vett
Burning Brakes
 
BB68Vett's Avatar
 
Member Since: Feb 2001
Location: Marietta GA
Posts: 927
Received 5 Likes on 5 Posts

Default Re: Need HELP from Atlanta Corvetters... (rainman69)

I think Alwyn678 and I will be able to do a run to look for it but we need to know what side of the road. Right or left. Also, can you narrow the spot down as to where you lost the fender? Between Exits 70 and 75 is a pretty long stretch of road. By the way, what city and State will we being sending this thing to, assuming of course we can locate it.
Old 07-07-2003, 02:12 PM
  #8  
rainman69
Drifting
Thread Starter
 
rainman69's Avatar
 
Member Since: Oct 2001
Location: Westampton NJ
Posts: 1,699
Likes: 0
Received 1 Like on 1 Post

Default Re: Need HELP from Atlanta Corvetters... (BB68Vett)

It's along the concrete divider between the two traffic flows. When I saw it land, it landed in the space between the yellow line and the divider. I got on I-20 close to exit 75, and heading west, the next exit I really noticed was 70. I would guess it was between about mile marker 73 and 70.
That's what I sent Alwyn678 in response to his IM. I was in the far left lane, travelling west. The fender landed in the "shoulder" area next to the wall between the traffic flows. It's black unpainted fiberglass. I'm currently in Columbus, Mississippi. Let me know if you need any more detail.
Old 07-07-2003, 04:23 PM
  #9  
Alwyn678
Team Owner
 
Alwyn678's Avatar
 
Member Since: Jun 2001
Location: Thomson Georgia
Posts: 43,085
Received 141 Likes on 124 Posts

Default Re: Need HELP from Atlanta Corvetters... (rainman69)

Mike and I are gonna go see if we can find it tonight........We will let ya know what we do or do not find :cheers:
Old 07-07-2003, 10:06 PM
  #10  
BB68Vett
Burning Brakes
 
BB68Vett's Avatar
 
Member Since: Feb 2001
Location: Marietta GA
Posts: 927
Received 5 Likes on 5 Posts

Default Re: Need HELP from Atlanta Corvetters... (rainman69)

We found the panel. See my post "Rainman69, you owe us BIG TIME"

Old 07-07-2003, 10:16 PM
  #11  
rainman69
Drifting
Thread Starter
 
rainman69's Avatar
 
Member Since: Oct 2001
Location: Westampton NJ
Posts: 1,699
Likes: 0
Received 1 Like on 1 Post

Default Re: Need HELP from Atlanta Corvetters... (BB68Vett)

Replied in it, also in here so you know that I know. Thanks again! :hurray:

Get notified of new replies

To Need HELP from Atlanta Corvetters...




Quick Reply: Need HELP from Atlanta Corvetters...



All times are GMT -4. The time now is 03:30 PM.