Brakes part Deux
#1
Advanced
Thread Starter
Member Since: Jan 2003
Location: Aiken SC
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Brakes part Deux
Thanks to good information on this forum we went into the complete brake system on our 1980. REsults where simple, REPLACE EVERYTHING. WE ardered4 piton Aluminum Calipers from Corvette Central along with new rotors. That should stop the pumping. One thing that did come out of it. I guess you all understood this that the TORQUE of the WHEELS will effect the brakes. Uneven torque will cause a runout in the rotors. :confused:
The balance of the project is going just fine. THese are some pictures :cheers:
http://www.leatherique.net/lrpltd_collection.htm
(Tried again) :D
[Modified by LRPMAN, 2:27 PM 3/28/2003]
The balance of the project is going just fine. THese are some pictures :cheers:
http://www.leatherique.net/lrpltd_collection.htm
(Tried again) :D
[Modified by LRPMAN, 2:27 PM 3/28/2003]