My Car is enroute to Van Steel!
#1
Melting Slicks
Thread Starter
Member Since: Jul 2002
Location: Deltona (son of Deland and DAYTONA) FL
Posts: 3,128
Likes: 0
Received 1 Like
on
1 Post
My Car is enroute to Van Steel!
Ok, so I wimped out! But I've been fighting
:banghead: with the belts now for days. I've done other cars with no problems, but GAH! that P/S pulley is so close to the crossmember. Anyway, I figured I'd let the pro's do my front end kit and take care of my belts at the same time.
So now instead of buying a press and some other tools that I would only hurt myself with, I'll have a car that I know is done right. I can't wait to see how a Vette is SUPPOSED to drive. :steering:
:banghead: with the belts now for days. I've done other cars with no problems, but GAH! that P/S pulley is so close to the crossmember. Anyway, I figured I'd let the pro's do my front end kit and take care of my belts at the same time.
So now instead of buying a press and some other tools that I would only hurt myself with, I'll have a car that I know is done right. I can't wait to see how a Vette is SUPPOSED to drive. :steering:
#2
Re: My Car is enroute to Van Steel! (isosceles)
Don't feel bad. I haven't even started rebuilding my front end and I've decided to take it somewhere to have it done. I've read too many horror stories and have had a bad enough run of trying to fix things myself that I'm ready to sit back and let someone else work for once.