Rear Main Seal Install Instructions
#1
Team Owner
Thread Starter
Rear Main Seal Install Instructions
A member e-mailed me this evening re the rear main seal install procedure. A local parts person advised him to pull the torque converter back to get the seal in. In other words pull the transmission. No..........The C3 seal is a half-moon affair that goes in with the end bearing cap being pulled. And the transmission being in place. The one-piece seal was introduced in 1986 I believe. This pic is the GM version of the C3 seal.
And here are the GM instructions for installation.
http://temp.corvetteforum.net/c3/pau...srtuct_001.jpg
http://temp.corvetteforum.net/c3/pau...ctions_003.jpg
[Modified by paul79, 8:09 PM 3/9/2003]
[Modified by paul79, 8:21 PM 3/9/2003]
[Modified by paul79, 8:33 PM 3/9/2003]
And here are the GM instructions for installation.
http://temp.corvetteforum.net/c3/pau...srtuct_001.jpg
http://temp.corvetteforum.net/c3/pau...ctions_003.jpg
[Modified by paul79, 8:09 PM 3/9/2003]
[Modified by paul79, 8:21 PM 3/9/2003]
[Modified by paul79, 8:33 PM 3/9/2003]