Thanks
#1
Heel & Toe
Thread Starter
Member Since: Feb 2003
Location: Fairmont WV
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Hi guys,
I have been reading the forum discussions for weeks now getting new ideas for my red 80 California 305 C3. As you can imagine I have been pretty disappointed with the horsepower since I purchased this car last June. After many weeks of reading what everyone had to say about engines, trannys, headers, interiors, and all other parts of a C3 I just had to do some modifications.
My 383 stroker long block is being shipped to me this week. I already have the Eldebrock performer intake and carb in the garage waiting to be put on. The Jet hot headers and sidepipes should be here in another day or two as well. The 2 ft of snow that dropped last weekend has been a really good excuse for me to stay in the garage to prep the car and clean up the engine bay.
As a write my first thread to the forum, I would like to thank everyone for the great ideas, and I hope to be as much help to you guys as you have been to me!!!!!!
Tim Fisher
WV
:cheers:
I have been reading the forum discussions for weeks now getting new ideas for my red 80 California 305 C3. As you can imagine I have been pretty disappointed with the horsepower since I purchased this car last June. After many weeks of reading what everyone had to say about engines, trannys, headers, interiors, and all other parts of a C3 I just had to do some modifications.
My 383 stroker long block is being shipped to me this week. I already have the Eldebrock performer intake and carb in the garage waiting to be put on. The Jet hot headers and sidepipes should be here in another day or two as well. The 2 ft of snow that dropped last weekend has been a really good excuse for me to stay in the garage to prep the car and clean up the engine bay.
As a write my first thread to the forum, I would like to thank everyone for the great ideas, and I hope to be as much help to you guys as you have been to me!!!!!!
Tim Fisher
WV
:cheers:
#4
Race Director
Re: Thanks (fishman)
Sounds like you are gonna have a real monster on your hands. Good luck with your project. Get us some pics. We like pictures.
BTW, Welcome to the forum.
BTW, Welcome to the forum.
#8
Le Mans Master
Member Since: Jan 2003
Location: Tuttle OK
Posts: 6,575
Likes: 0
Received 1 Like
on
1 Post
Cruise-In VIII Veteran
Re: Thanks (Eddie 70)
Sounds like you are gonna have a real monster on your hands. Good luck with your project. Get us some pics. We like pictures.
BTW, Welcome to the forum.
BTW, Welcome to the forum.
#11
Le Mans Master
Re: Thanks (patsnitrovette)
:eek: Wow from a 305 right to a 383 :eek: . Be sure to wear an old pair of underwear for that maiden voyage :lol: :jester .
Welcome to the forum :seeya
Welcome to the forum :seeya
#13
Heel & Toe
Thread Starter
Member Since: Feb 2003
Location: Fairmont WV
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: Thanks (fishman)
Eldebrock performer intake, Eldebrock 750CFM performer carb, 10:1 compression, flat top pistons, cam lift of .490 with a duration of 292 intake and 300 degree exhaust. It will probably shake the paint off at idle but the piece of crap rice burner at the stop light wont know what happened........ :steering:
#15
Race Director
Member Since: Jun 2001
Location: The Only Corvette in Gila Bend, Az.
Posts: 16,483
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '09
Re: Thanks (ZL1powr)
WOW! you are not a very god CF Member, you ordered all that stuff, without asking us for advice. :mad :mad :mad
Just kidding :jester sounds like you will be asking plenty-o-questions during the swap.
Welcome to the greatest place on the web. :seeya
Just kidding :jester sounds like you will be asking plenty-o-questions during the swap.
Welcome to the greatest place on the web. :seeya