One step closer to Heaven
#1
Race Director
Thread Starter
Member Since: Sep 2002
Location: San Diego - Deep Within The State of CONFUSION!
Posts: 10,362
Likes: 0
Received 2 Likes
on
2 Posts
One step closer to Heaven
Yepperzz !
Today I finally got the new fuel pump on her and finished the exhaust tips project started weeks ago. We had the first dry day here this week, and I drove the Vette to work. We put the fuel pump on it but it was too darn late to get her back on the Dyno.
(I had it on the Dyno when the new motor turned 1,000 miles but it was running outta fuel so bad above 4,000 that it had less than 275HP ;-((
I can tell ya one thing from the trip home though: WOW!! what a difference. I'll bet that pump brings my air fuel right where it needed to be in the first place. Just in case, I also have a HIGH-FLOW Needle and Seat for the Edelbrock Q-Jet waiting to be installed. If I can, I'll install it just because it's THERE but I am dying to get her back on the machine to check the power!!
Paul in San Diego
[Modified by SanDiegoPaul, 6:38 PM 2/14/2003]
Today I finally got the new fuel pump on her and finished the exhaust tips project started weeks ago. We had the first dry day here this week, and I drove the Vette to work. We put the fuel pump on it but it was too darn late to get her back on the Dyno.
(I had it on the Dyno when the new motor turned 1,000 miles but it was running outta fuel so bad above 4,000 that it had less than 275HP ;-((
I can tell ya one thing from the trip home though: WOW!! what a difference. I'll bet that pump brings my air fuel right where it needed to be in the first place. Just in case, I also have a HIGH-FLOW Needle and Seat for the Edelbrock Q-Jet waiting to be installed. If I can, I'll install it just because it's THERE but I am dying to get her back on the machine to check the power!!
Paul in San Diego
[Modified by SanDiegoPaul, 6:38 PM 2/14/2003]