TH400 (72 MY) specifications
#1
Racer
Thread Starter
Member Since: May 2000
Location: Niedernhausen, Germany
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
TH400 (72 MY) specifications
Has anybody got outside dimensions of the TH400 (Length)?
What spline and diameter is the output shaft?
Thanx,
Thomas
What spline and diameter is the output shaft?
Thanx,
Thomas
#3
Safety Car
Re: TH400 (72 MY) specifications (V8yunkie)
I'm not really sure but I do know that you want a short tailshaft housing with the Corvette. If I still had the TH400 sitting in my basement I would just go down and look at it (but I gave it away to my friend).
#5
Safety Car
Re: TH400 (72 MY) specifications (V8yunkie)
I just found this link that includes the specs yur looking for.
http://www.bhrmotorsports.com/data.htm
http://www.bhrmotorsports.com/data.htm
#6
Safety Car
Re: TH400 (72 MY) specifications (V8yunkie)
http://www.bhrmotorsports.com/data.htm
I still have my original TH400 from when I swaped in a 2004R. I just went out and counted the output shaft splines and measured its aproximate diameter. 32 spline, aprox-- 1 and 5/16" dia.
[Modified by Jvette73, 2:05 PM 2/15/2003]
[Modified by Jvette73, 2:06 PM 2/15/2003]
I still have my original TH400 from when I swaped in a 2004R. I just went out and counted the output shaft splines and measured its aproximate diameter. 32 spline, aprox-- 1 and 5/16" dia.
[Modified by Jvette73, 2:05 PM 2/15/2003]
[Modified by Jvette73, 2:06 PM 2/15/2003]